BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

Rob, ...thanks.
Now i'm in another little issue, in my wallet I have in balance field 1 220 756.98 BIBLEPAY ( cut&paste from wallet ) but when i try to send to Altar address the amount of 452 000.000000 RPC response me "the amount exed your balance"
The maximus ammount that i can send is ( I click on wallet "use available balance" ) 142 245.58559888

So now ?
Thanks again
Ale


[/list][/list]

Rob, stil in same issue


10:40:23
masternode status


10:40:23
{
  "outpoint": "0000000000000000000000000000000000000000000000000000000000000000-4294967295",
  "service": "93.55.250.*:40000",
  "state": "WAITING_FOR_PROTX",
  "status": "Waiting for ProTx to appear on-chain"
}

Thanks in advance...

Rob, stil in same issue


10:40:23
masternode status


10:40:23
{
  "outpoint": "0000000000000000000000000000000000000000000000000000000000000000-4294967295",
  "service": "93.55.250.*:40000",
  "state": "WAITING_FOR_PROTX",
  "status": "Waiting for ProTx to appear on-chain"
}

Thanks in advance...

I dont see any new sanctuary registrations in the list (we usually at least see one that is pending with a wrong IP) so we need to find out what happened a step earlier.

Can you paste your collateral output TXID and your Sanc proTXID so I can look at the collateral?  If you lost them you can get them from the bottom of deterministic.conf.  If you dont have that you can start over and log each step of the way in notepad, and then provide it.
Technically though if you are adding an entry to %appdata%\biblepay\masternode.conf and doing a registersanc, you should have that entry appended in the deterministic.conf file.  If you dont thats a problem in itself -- let me know.

[/list][/list]

So two updates as to what is going on:

On unchained.biblepay.org check out Social Media | Watch Videos.
The first main change is these videos are coming from hundreds of hard drives simultaneously (streaming) not from 1 sanc.
You can try watching Enoch, main test is to pause the video and skip over 30 minutes and unpause.  This feature streams just the minute you watched, and skips over the stream to the other area (efficiently).  Its also hosting it as an mp4 now and not an HLS.

As far as the BBP exchange:
Testing is going very well.  I have a suggestion to make it user friendly for new users to be able to deposit and withdraw and see their balance without having to use the rpc commands.  My goal is to work that in next and then we can have one more testing round and then release it to prod.

So two updates as to what is going on:

On unchained.biblepay.org check out Social Media | Watch Videos.
The first main change is these videos are coming from hundreds of hard drives simultaneously (streaming) not from 1 sanc.
You can try watching Enoch, main test is to pause the video and skip over 30 minutes and unpause.  This feature streams just the minute you watched, and skips over the stream to the other area (efficiently).  Its also hosting it as an mp4 now and not an HLS.

As far as the BBP exchange:
Testing is going very well.  I have a suggestion to make it user friendly for new users to be able to deposit and withdraw and see their balance without having to use the rpc commands.  My goal is to work that in next and then we can have one more testing round and then release it to prod.

Hi Rob,

could you please add a password reset on unchained.biblepay.org either i cant remember my username or password, its been a while .

I dont see any new sanctuary registrations in the list (we usually at least see one that is pending with a wrong IP) so we need to find out what happened a step earlier.

Can you paste your collateral output TXID and your Sanc proTXID so I can look at the collateral?  If you lost them you can get them from the bottom of deterministic.conf.  If you dont have that you can start over and log each step of the way in notepad, and then provide it.
Technically though if you are adding an entry to %appdata%\biblepay\masternode.conf and doing a registersanc, you should have that entry appended in the deterministic.conf file.  If you dont thats a problem in itself -- let me know.

[/list][/list]

10:52:44
exec upgradesanc AltareSanto 0


10:52:45
{
  "Command": "upgradesanc",
  "Summary": "Creating protx_register command for Sanctuary AltareSanto with IP 93.55.252.66:40000 with TXID ec3e3f040b87aa37ed761b2446c49bda2c78f1517577e2e7bfe344270c580f67",
  "bls_public_key": "a83847615495e2ce6fea600466db17b50438ca6f2c196b9af78f561f0670e339bbf357c773e824965742831566c87386",
  "bls_private_key": "0x0",
  "pro_reg_txid": "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",
  "pro_reg_collateral_address": "BHn32VamZjQKE3iAtNWeN3LoDDsNQAr8yM",
  "pro_reg_signed_message": "BQLYy9oNyiCdbym3Vd7dd8nqiP2xAipdYc|0|BK5XDb4TrZHRzTQnVEQhaqV3DbhX65b7zY|BK5XDb4TrZHRzTQnVEQhaqV3DbhX65b7zY|a72aa3b28ae2b9edcbd6e0da95ed5c1f3be00fd2fe87c8a08718e8aba4353dc3",
  "pro_reg_signature": "HzFe/j5vh/ipci/3vAGCodadqvgh+XaVSO5wNLVkul5hA1wheBL1yC2+IwqjxIMr1/sDMQHR8xMJA5uXiSL8hWk=",
  "sent_txid": ""
}

Hi Rob,

could you please add a password reset on unchained.biblepay.org either i cant remember my username or password, its been a while .

Hi Prof B,

I added the ResetPassword button back.  Let me know if it does not allow you in now.

10:52:44
exec upgradesanc AltareSanto 0


10:52:45
{
  "Command": "upgradesanc",
  "Summary": "Creating protx_register command for Sanctuary AltareSanto with IP 93.55.252.66:40000 with TXID ec3e3f040b87aa37ed761b2446c49bda2c78f1517577e2e7bfe344270c580f67",
  "bls_public_key": "a83847615495e2ce6fea600466db17b50438ca6f2c196b9af78f561f0670e339bbf357c773e824965742831566c87386",
  "bls_private_key": "0x0",
  "pro_reg_txid": "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",
  "pro_reg_collateral_address": "BHn32VamZjQKE3iAtNWeN3LoDDsNQAr8yM",
  "pro_reg_signed_message": "BQLYy9oNyiCdbym3Vd7dd8nqiP2xAipdYc|0|BK5XDb4TrZHRzTQnVEQhaqV3DbhX65b7zY|BK5XDb4TrZHRzTQnVEQhaqV3DbhX65b7zY|a72aa3b28ae2b9edcbd6e0da95ed5c1f3be00fd2fe87c8a08718e8aba4353dc3",
  "pro_reg_signature": "HzFe/j5vh/ipci/3vAGCodadqvgh+XaVSO5wNLVkul5hA1wheBL1yC2+IwqjxIMr1/sDMQHR8xMJA5uXiSL8hWk=",
  "sent_txid": ""
}

Hi Lalex,
Thank you for your patience.

On this one you are close but it is a similar problem to last time.
Btw, I hid your private bls sanc key.  (Its just for control of the sanc, not the collateral so no biggie).

So the issue is still that you did not send the right collateral to the collateral address.
As I posted last week, it should be 450001 (not 450 bbp).

See your chainz balance you sent here:
https://chainz.cryptoid.info/bbp/tx.dws?ec3e3f040b87aa37ed761b2446c49bda2c78f1517577e2e7bfe344270c580f67.htm

You can also go with Sanc, 4500001 or temple  45000001 alternatively but altar is 450001.

[/list][/list]

Hi Lalex,
Thank you for your patience.

On this one you are close but it is a similar problem to last time.
Btw, I hid your private bls sanc key.  (Its just for control of the sanc, not the collateral so no biggie).

So the issue is still that you did not send the right collateral to the collateral address.
As I posted last week, it should be 450001 (not 450 bbp).

See your chainz balance you sent here:
https://chainz.cryptoid.info/bbp/tx.dws?ec3e3f040b87aa37ed761b2446c49bda2c78f1517577e2e7bfe344270c580f67.htm

You can also go with Sanc, 4500001 or temple  45000001 alternatively but altar is 450001.

[/list][/list]

Thanks for your answer Rob.

Please check below

https://chainz.cryptoid.info/bbp/tx.dws?1826911.htm ( 03b8c0e70ca3b21dfc72bf4fe46a7294016d542db95b4ad20bb18e7794cdee19 )

https://chainz.cryptoid.info/bbp/address.dws?BHn32VamZjQKE3iAtNWeN3LoDDsNQAr8yM.htm

God bless you.

Alex.

Thanks for your answer Rob.

Please check below

https://chainz.cryptoid.info/bbp/tx.dws?1826911.htm ( 03b8c0e70ca3b21dfc72bf4fe46a7294016d542db95b4ad20bb18e7794cdee19 )

https://chainz.cryptoid.info/bbp/address.dws?BHn32VamZjQKE3iAtNWeN3LoDDsNQAr8yM.htm

God bless you.

Alex.

Hi Lalex,

Theres something wrong.
1) When I do the getrawtransaction 03b8c0e70ca3b21dfc72bf4fe46a7294016d542db95b4ad20bb18e7794cdee19 1
I can see that you sent 450,001.99 to the address in vout1.  It has to be exactly 450001 though, for it to work.
2) Once you have the TXID and ordinal, then you go on to the further steps - in order - placing the fields in the masternode.conf, and calling the exec upgradesanc name_of_entry, and, during that step you should clearly see if it accepted the collateral.
In this case you should have an error on the screen (bad collateral).
Once you have an error, you have to start over and make new collateral (you cant make collateral after the fact out of order) etc.

Good luck man.

[/list][/list]

Hi Prof B,

I added the ResetPassword button back.  Let me know if it does not allow you in now.

Thank you yes it worked perfectly.

Hi Lalex,

Theres something wrong.
1) When I do the getrawtransaction 03b8c0e70ca3b21dfc72bf4fe46a7294016d542db95b4ad20bb18e7794cdee19 1
I can see that you sent 450,001.99 to the address in vout1.  It has to be exactly 450001 though, for it to work.
2) Once you have the TXID and ordinal, then you go on to the further steps - in order - placing the fields in the masternode.conf, and calling the exec upgradesanc name_of_entry, and, during that step you should clearly see if it accepted the collateral.
In this case you should have an error on the screen (bad collateral).
Once you have an error, you have to start over and make new collateral (you cant make collateral after the fact out of order) etc.

Good luck man.

[/list][/list]

Thanks Rob I will start from fresh !

So restart 
Ale

Biblepay - 0.24.5 - Mandatory Upgrade
https://github.com/biblepay/biblepay/releases/tag/0.24.5-Mandatory


Add support for XLM (Stellar)
Use RSA for key security
Add BBP logo to left menu and trading coin logo to the exchange UI
Add ability to switch exchange currencies (DOGE, XLM)

The coins that you legitimately bought from exchanges or mined in the past, those are always safe.

When a user decides not to upgrade, you will go on your own personal fork (along with the other sancs who have not upgraded), and will have your own invalid version of the blockchain.

Well, both statements cannot be true.

Do you expect all people who bought coins and downloaded them into their wallets to be watching this forum every month to see if you have posted a mandatory upgrade?

That's not the way the world works, if other coins are any example.

Most people leave their wallets unattended without checking in the coin's forums very often.   Most mandatory updates happen maybe twice a year.  And that would be rare to be that many.  I've watched and staked over 20 coins in the last 9 years.

Well, both statements cannot be true.

Do you expect all people who bought coins and downloaded them into their wallets to be watching this forum every month to see if you have posted a mandatory upgrade?

That's not the way the world works, if other coins are any example.

Most people leave their wallets unattended without checking in the coin's forums very often.   Most mandatory updates happen maybe twice a year.  And that would be rare to be that many.  I've watched and staked over 20 coins in the last 9 years.

1) I make every effort Not to post false info and will not mislead people.

2) Both were true.  Please explain with an example if you dont believe that is true.

3) Correct, BBP is very different than clonecoins.  With DOGE for instance you have the same wallet that was forked from Litecoin for example, and has not changed in 10 years, so what do you expect.

4) Yes, By now I would expect the BBP users to be checking for mandatory upgrades.

  You may have one misconception though: if you miss a mandatory and run the wallet for a few extra months, all that will happen is your sanc wont earn any new coins.  What would you be missing, 20K of BBP worth $2?  No big deal if you delay to upgrade for a few months.  My original point was that coins that you legitimately bought and transferred to the wallet are all still there, that was the primary part of the answer.  Exchanges stay in sync with EVERY mandatory, so those coins follow the wallet.

Hi Rob,

How to setting up a new Sanc? Can you share the step , thanks.