BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

Hi,  Sorry, didnt get a notification email that you replied.
So doing it that way leaves so many questions, so I would recommend you just delete the pb.dat file, verify you are on the latest wallet (did you check the version to see if it matches Day of The Lord, and also that the blocks are synced up to chainz block hash), and then unlock the wallet, and launch Portfolio Builder from the menu; and it will make you a new PB.dat file.  Then re-test.

Hi Rob,

So i went back to the original version of the wallet, deleted pb.dat, it then recreated it for me, but my bbp trading address still shows as 0 the address is

BF3pdwnicqDkHkEbjE729ndk4cXLLEYXFk

Exchange still shows 0 balance, but Chainz shows a balance.

I definitely have the latest version and the number of blocks match up.

Any ideas?

Hi Rob,

So i went back to the original version of the wallet, deleted pb.dat, it then recreated it for me, but my bbp trading address still shows as 0 the address is

BF3pdwnicqDkHkEbjE729ndk4cXLLEYXFk

Exchange still shows 0 balance, but Chainz shows a balance.

I definitely have the latest version and the number of blocks match up.

Any ideas?

Ahh, perfect, now we are close, because we know the wallets current keys match up with what the exchange is trying to use.
I see that balance you have for this address on chainz, yes. 

Let me reproduce this in the PB.exe with my address and see if all is OK (it calls one of the temples for the address balance); need to check a few things.

Ahh, perfect, now we are close, because we know the wallets current keys match up with what the exchange is trying to use.
I see that balance you have for this address on chainz, yes. 

Let me reproduce this in the PB.exe with my address and see if all is OK (it calls one of the temples for the address balance); need to check a few things.

Thank you

Thank you

Ok, so I first went into the PB.exe in debug, and I saw that I had a zero balance, so I bounced Temple1 (which provides the UTXOs back to the c# which gives the sum(balance)).
Then I realized, I had a 0 balance because my wallet spent the coins to myself, so then I funded my address and hit refresh and I could see my balance.
(So now Im not sure if it was the bounce or the other thing).
Anyway, just for the sake of testing, I put your address in my debug code and it was able to see your correct UTXO set and balance.
Can you try now and relaunch it and see if all works fine?

If it does not let me know and we can go further - probably by putting logging in the pb.exe UTXO area for this issue.

Ok, so I first went into the PB.exe in debug, and I saw that I had a zero balance, so I bounced Temple1 (which provides the UTXOs back to the c# which gives the sum(balance)).
Then I realized, I had a 0 balance because my wallet spent the coins to myself, so then I funded my address and hit refresh and I could see my balance.
(So now Im not sure if it was the bounce or the other thing).
Anyway, just for the sake of testing, I put your address in my debug code and it was able to see your correct UTXO set and balance.
Can you try now and relaunch it and see if all works fine?

If it does not let me know and we can go further - probably by putting logging in the pb.exe UTXO area for this issue.

Hi Rob,

I tried again also put some more money in to the address but it still shows as 0. Also did wallet repair , refresh, anything else i can try.

Hi Rob,

I tried again also put some more money in to the address but it still shows as 0. Also did wallet repair , refresh, anything else i can try.

Ok, no problem, at least we have a clear idea where the issue is now.  Ill add some detailed logging in that area and let you know when its ready to test.

Thanks.

Hi Rob,

I tried again also put some more money in to the address but it still shows as 0. Also did wallet repair , refresh, anything else i can try.

FYI: I installed BBP on one of my remote Windows server cloud machines (IE on a faraway network) and tested the pb.exe by funding it with a little BBP and I was able to see the coins; so that eliminates the potential firewall issue.   Ill add some logging to the app and let you know when its ready to test.

FYI: I installed BBP on one of my remote Windows server cloud machines (IE on a faraway network) and tested the pb.exe by funding it with a little BBP and I was able to see the coins; so that eliminates the potential firewall issue.   Ill add some logging to the app and let you know when its ready to test.

Thank you very much Rob, no problem at all i can wait. I'm just glad we can solve it.

Thank you very much Rob, no problem at all i can wait. I'm just glad we can solve it.

Hi Prof B,
So I have some progress for you.
I put the extra logging in PB.exe.  Could you try the following please:
- Close Portfolio Builder
- Close Extensions EXE
- Re-click bbp extensions from the left menu of the core wallet (after the wallet is unlocked)
- Extensions appears
- It should auto upgrade pb.exe up to 1.87
- Launch PortfolioBuilder
- Go to trading room exchange
- Click refresh to get your balance
- Logs in this app are located at:
c:\inetpub\wwwroot\bms\bms.txt
Check log for "12/9/2025 5:54:43 PM: GETTING BBP BALANCE FOR ADDRESS your_address"
Check to see if it receives a utxo set
Plz paste here if it does not
Also when you see the temple host and port that it calls, you may try to telnet to that host and port from the command line and verify your firewall outbound is open on port 20000.

Rob,
Can we start an online show with you? give me 6 hours a month I'll do all the recordings editing and promotion
No strings attached...

Hi Prof B,
So I have some progress for you.
I put the extra logging in PB.exe.  Could you try the following please:
- Close Portfolio Builder
- Close Extensions EXE
- Re-click bbp extensions from the left menu of the core wallet (after the wallet is unlocked)
- Extensions appears
- It should auto upgrade pb.exe up to 1.87
- Launch PortfolioBuilder
- Go to trading room exchange
- Click refresh to get your balance
- Logs in this app are located at:
c:\inetpub\wwwroot\bms\bms.txt
Check log for "12/9/2025 5:54:43 PM: GETTING BBP BALANCE FOR ADDRESS your_address"
Check to see if it receives a utxo set
Plz paste here if it does not
Also when you see the temple host and port that it calls, you may try to telnet to that host and port from the command line and verify your firewall outbound is open on port 20000.

Hi Rob,

In the log i just get
10/12/2025 08:52:40: GETTING BBP BALANCE FOR ADDRESS BF3pdwnicqDkHkEbjE729ndk4cXLLEYXFk
10/12/2025 08:52:40: Connecting to sanc1.biblepay.org:20000
10/12/2025 08:53:01: UTXO SET
10/12/2025 08:53:01: BALANCE 0 BBP

on telnet i get
using this command telnet sanc1.biblepay.org 20000
Connecting To sanc1.biblepay.org...Could not open connection to the host, on port 20000: Connect failed

i have norton on my machine but other then that nothing maybe its blocking port 20000 ill try and add rules for that port

Hi Rob,

In the log i just get
10/12/2025 08:52:40: GETTING BBP BALANCE FOR ADDRESS BF3pdwnicqDkHkEbjE729ndk4cXLLEYXFk
10/12/2025 08:52:40: Connecting to sanc1.biblepay.org:20000
10/12/2025 08:53:01: UTXO SET
10/12/2025 08:53:01: BALANCE 0 BBP

on telnet i get
using this command telnet sanc1.biblepay.org 20000
Connecting To sanc1.biblepay.org...Could not open connection to the host, on port 20000: Connect failed

i have norton on my machine but other then that nothing maybe its blocking port 20000 ill try and add rules for that port

i just checked ports are all open

Rob,
Can we start an online show with you? give me 6 hours a month I'll do all the recordings editing and promotion
No strings attached...

Hi Mr. A,
No not at this time.  I dont have 15 minutes extra per month at this time.
Thanks.
Ill let you know when I have all the financial pieces ready to merge in the API and we can probably do something at that time.

On a side note, I did attempt to have a one hour per week prayer call for two years and no one showed up except Pat and his friend (at least we got through it however and it was edifying).  That will be something we can discuss in the future once BBP has sort of a full suite running again.  A weekly prayer call for the nations.

i just checked ports are all open

Unreal, the machine I was testing from on the remote network had a firewall rule to allow the other sancs ports; so it was always giving false positives.
Ok, I see the problem, a rule got erased that existed before on temple1 to allow the port; and of course when I did my telnet yesterday it succeeded so I didnt look for the rule.
I readded the rule and it works now (I was able to test it from Online Port Tester - that it failed then succeeded).
So it should work for you now.
Amazing your the first person that reported this.