Bible Pay

Read 416048 times

  • sdc
  • Newbie

    • 11


    • 0
    • January 11, 2018, 12:31:32 PM
    more
Wait 5 blocks, then close and restart your wallet. Run exec getboincinfo again and we'll go from there.

Done. Nothing 6 blocks later.


13:33:45

{
  "Command": "getboincinfo",
  "CPID": "",
  "Address": "",
  "CPIDS": "",
  "CPID-Age (hours)": 422349,
  "NextSuperblockHeight": 33620,
  "NextSuperblockBudget": 2660579,
  "Total Payments (One Day)": 0,
  "Total Payments (One Week)": 0,
  "Total Budget (One Day)": 0,
  "Total Budget (One Week)": 0,
  "Superblock Count (One Week)": 0,
  "Superblock Hit Count (One Week)": 0,
  "Superblock List": "",
  "Last Superblock Height": 0,
  "Last Superblock Budget": 0,
  "Last Superblock Payment": -2,
  "Magnitude (One-Day)": 0,
  "Magnitude (One-Week)": 0
}


13:33:54

getblockcount


13:33:54

33447


  • znffal
  • Full Member

    • 129


    • 7
    • October 02, 2017, 04:01:47 PM
    more
i zapped all of mine just to be sure.

Awesome, thanks. I just realised that I have some addnodes in my config. This was from my old PoBH wallet. But some of these nodes could be on different chains?

What addnode addresses should I have in my config?


  • T-Mike
  • Sr. Member

    • 375


    • 2
    • February 06, 2018, 06:12:58 PM
    more
Done. Nothing 6 blocks later.


13:33:45

{
  "Command": "getboincinfo",
  "CPID": "",
  "Address": "",
  "CPIDS": "",
  "CPID-Age (hours)": 422349,
  "NextSuperblockHeight": 33620,
  "NextSuperblockBudget": 2660579,
  "Total Payments (One Day)": 0,
  "Total Payments (One Week)": 0,
  "Total Budget (One Day)": 0,
  "Total Budget (One Week)": 0,
  "Superblock Count (One Week)": 0,
  "Superblock Hit Count (One Week)": 0,
  "Superblock List": "",
  "Last Superblock Height": 0,
  "Last Superblock Budget": 0,
  "Last Superblock Payment": -2,
  "Magnitude (One-Day)": 0,
  "Magnitude (One-Week)": 0
}


13:33:54

getblockcount


13:33:54

33447

OK, now try exec associate email pass.


  • T-Mike
  • Sr. Member

    • 375


    • 2
    • February 06, 2018, 06:12:58 PM
    more
Awesome, thanks. I just realised that I have some addnodes in my config. This was from my old PoBH wallet. But some of these nodes could be on different chains?

What addnode addresses should I have in my config?

My config:
rpcuser=aaa
rpcpassword=xxx
rpcport=9998
rpcallowip=127.0.0.1
listen=0
server=1
daemon=1
logtimestamps=1
maxconnections=256
addnode=node.biblepay.org
addnode=biblepay.inspect.network
gen=1
genproclimit=1
polpercentage=50


  • sdc
  • Newbie

    • 11


    • 0
    • January 11, 2018, 12:31:32 PM
    more
OK, now try exec associate email pass.

RPC Error


  • sdc
  • Newbie

    • 11


    • 0
    • January 11, 2018, 12:31:32 PM
    more
RPC Error

Ah... then when I run it again it says.

 "Results": "A DCBTX was advertised less then 5 blocks ago. Please wait a full 5 blocks for your DCBTX to enter the chain."

So basically, the first command produced an error, but running exec a second time assumes that the first command was successful. What is an RPC error anyways?


  • T-Mike
  • Sr. Member

    • 375


    • 2
    • February 06, 2018, 06:12:58 PM
    more
Ah... then when I run it again it says.

 "Results": "A DCBTX was advertised less then 5 blocks ago. Please wait a full 5 blocks for your DCBTX to enter the chain."

So basically, the first command produced an error, but running exec a second time assumes that the first command was successful. What is an RPC error anyways?

go into biblepaycore and look at the debug file, what does it say when you associate?


  • jaapgvk
  • Hero Member

    • 558


    • 31
    • September 01, 2017, 08:02:57 PM
    • Netherlands
    more
We'll figure this out together, even if I have to add another argument to podcupdate.
First though could you please restart with -zapwallettxes, and check your stakebalance and resend you podcupdate again?
Lets see if that fixes it- also it takes 6 confirms for the wallet to memorize the utxoweight.

I had the same issue as Orbis, tried this, and now it's fine :)

Code: [Select]
22:52:43

exec getboincinfo


22:52:44

{
  "Command": "getboincinfo",
  "CPID": "d9b22fccfae5582d4ee7838883aaa3cf",
  "Address": "BSqcLcFLYt3bKvoUaZ5rGURW75xgjJdQoD",
  "CPIDS": "d9b22fccfae5582d4ee7838883aaa3cf;",
  "CPID-Age (hours)": 422349,
  "NextSuperblockHeight": 33620,
  "NextSuperblockBudget": 2660579,
  "d9b22fccfae5582d4ee7838883aaa3cf_ADDRESS": "BSqcLcFLYt3bKvoUaZ5rGURW75xgjJdQoD",
  "d9b22fccfae5582d4ee7838883aaa3cf_RAC": 10356.26,
  "d9b22fccfae5582d4ee7838883aaa3cf_TEAM": 15044,
  "d9b22fccfae5582d4ee7838883aaa3cf_TaskWeight": 100,
  "d9b22fccfae5582d4ee7838883aaa3cf_UTXOWeight": 100,
  "Total_RAC": 10356.26,
  "Total Payments (One Day)": 0,
  "Total Payments (One Week)": 0,
  "Total Budget (One Day)": 0,
  "Total Budget (One Week)": 0,
  "Superblock Count (One Week)": 0,
  "Superblock Hit Count (One Week)": 0,
  "Superblock List": "",
  "Last Superblock Height": 0,
  "Last Superblock Budget": 0,
  "Last Superblock Payment": -1,
  "Magnitude (One-Day)": 0,
  "Magnitude (One-Week)": 0
}


  • sdc
  • Newbie

    • 11


    • 0
    • January 11, 2018, 12:31:32 PM
    more
go into biblepaycore and look at the debug file, what does it say when you associate?

Is this the right section of the debug? I ran a search for associate and this is what I came up with.
Also, perhaps I missed a step? I followed Togo's guide for Windows. I set up a Rosetta@Home account and I can login with that email/password to their website.
The CPID below doesn't seem to match the one on my Rosetta account.

2018-03-07 21:33:28 GUI: QObject::connect: No such slot DistributedComputingDialog::clicked() in qt/distributedcomputingdialog.cpp:57
2018-03-07 21:33:28 GUI: QObject::connect:  (sender name:   'btnAssociate')
2018-03-07 21:33:28 GUI: QObject::connect:  (receiver name: 'DistributedComputingDialog')
2018-03-07 21:33:28 . model set .
2018-03-07 21:34:56  VerifyDistributedBurnTransaction::PASS for CPID A64253121D79782C27CFAA3429412A64
2018-03-07 21:34:56  VerifyDistributedBurnTransaction::PASS for CPID A64253121D79782C27CFAA3429412A64
2018-03-07 21:35:56 CMasternodeBroadcast::Update -- Got UPDATED Masternode entry: addr=144.202.64.156:40000
2018-03-07 21:36:01 CMasternodeBroadcast::Update -- Got UPDATED Masternode entry: addr=104.238.158.39:40000
2018-03-07 21:38:09 CMasternodeBroadcast::Update -- Got UPDATED Masternode entry: addr=45.32.216.160:40000
2018-03-07 21:38:24 CMasternodeBroadcast::Update -- Got UPDATED Masternode entry: addr=45.32.218.12:40000
2018-03-07 21:38:37 CGovernanceManager::ProcessVote -- Unknown parent object , MN outpoint = f0db4fbdb37c627d55c83fb4bba953b0b01b80a996f86010d02a65a42a8192bc-1, governance object hash = 14ec3b00c46a8f1090be5bc46100e5df547f5e9ed6c3cba8a75ca72b4a9ef572
2018-03-07 21:39:34 RPC error
2018-03-07 21:40:31 CInstantSend::CreateTxLockCandidate -- creating birth, txid=cbc13a395ee8925a48cfa2781cb32734da42490945fcffe2b8c8f0b1a9d503f3
2018-03-07 21:40:31 CInstantSend::CreateTxLockCandidate -- update empty, txid=cbc13a395ee8925a48cfa2781cb32734da42490945fcffe2b8c8f0b1a9d503f3
2018-03-07 21:40:31 CInstantSend::ProcessTxLockRequest -- accepted, txid=cbc13a395ee8925a48cfa2781cb32734da42490945fcffe2b8c8f0b1a9d503f3
2018-03-07 21:40:31  InstantSend : AllOutPointReady 0.000000, IsLockedInstantSendTransaction 0.000000, bool 1.000000


  • rastiks
  • Newbie

    • 22


    • 1
    • February 11, 2018, 05:48:57 AM
    more
Did you check to see if the coins were in BPzKKaUa2yXDufhd1YchEZDHY7aSLrvmyC?

They were  not :) Moved to that address (https://biblepay-explorer.org/address/BPzKKaUa2yXDufhd1YchEZDHY7aSLrvmyC), but  stakebalance is still 0, "PODCUpdate": returns "Unable to create PODC UTXO::Balance too low."


  • Rob Andrews
  • Administrator

    • 4097


    • 97
    • June 05, 2017, 08:09:04 PM
    • Patmos, Island Of
    more
So I know some of you with 0 utxo weight are getting nervous, but have no fear, we have 24 hours before the first PODC superblock to work this out.

There is a rule in the wallet that says : If a PODC Update was sent within the last 24 hours and it appears to have valid tasks in it, dont resend a new one (even if the user executes exec podcupdate).

So in light of all these inability to control new update issues, I am putting in a feature now so you can type 'exec podcupdate force'.

This should allow those who are stuck to pull out of the rut.



  • T-Mike
  • Sr. Member

    • 375


    • 2
    • February 06, 2018, 06:12:58 PM
    more
Is this the right section of the debug? I ran a search for associate and this is what I came up with.
Also, perhaps I missed a step? I followed Togo's guide for Windows. I set up a Rosetta@Home account and I can login with that email/password to their website.
The CPID below doesn't seem to match the one on my Rosetta account.

2018-03-07 21:33:28 GUI: QObject::connect: No such slot DistributedComputingDialog::clicked() in qt/distributedcomputingdialog.cpp:57
2018-03-07 21:33:28 GUI: QObject::connect:  (sender name:   'btnAssociate')
2018-03-07 21:33:28 GUI: QObject::connect:  (receiver name: 'DistributedComputingDialog')
2018-03-07 21:33:28 . model set .
2018-03-07 21:34:56  VerifyDistributedBurnTransaction::PASS for CPID A64253121D79782C27CFAA3429412A64
2018-03-07 21:34:56  VerifyDistributedBurnTransaction::PASS for CPID A64253121D79782C27CFAA3429412A64
2018-03-07 21:35:56 CMasternodeBroadcast::Update -- Got UPDATED Masternode entry: addr=144.202.64.156:40000
2018-03-07 21:36:01 CMasternodeBroadcast::Update -- Got UPDATED Masternode entry: addr=104.238.158.39:40000
2018-03-07 21:38:09 CMasternodeBroadcast::Update -- Got UPDATED Masternode entry: addr=45.32.216.160:40000
2018-03-07 21:38:24 CMasternodeBroadcast::Update -- Got UPDATED Masternode entry: addr=45.32.218.12:40000
2018-03-07 21:38:37 CGovernanceManager::ProcessVote -- Unknown parent object , MN outpoint = f0db4fbdb37c627d55c83fb4bba953b0b01b80a996f86010d02a65a42a8192bc-1, governance object hash = 14ec3b00c46a8f1090be5bc46100e5df547f5e9ed6c3cba8a75ca72b4a9ef572
2018-03-07 21:39:34 RPC error
2018-03-07 21:40:31 CInstantSend::CreateTxLockCandidate -- creating birth, txid=cbc13a395ee8925a48cfa2781cb32734da42490945fcffe2b8c8f0b1a9d503f3
2018-03-07 21:40:31 CInstantSend::CreateTxLockCandidate -- update empty, txid=cbc13a395ee8925a48cfa2781cb32734da42490945fcffe2b8c8f0b1a9d503f3
2018-03-07 21:40:31 CInstantSend::ProcessTxLockRequest -- accepted, txid=cbc13a395ee8925a48cfa2781cb32734da42490945fcffe2b8c8f0b1a9d503f3
2018-03-07 21:40:31  InstantSend : AllOutPointReady 0.000000, IsLockedInstantSendTransaction 0.000000, bool 1.000000

I'm not sure, is your wallet unlocked and more then 1 BBP?


  • Rob Andrews
  • Administrator

    • 4097


    • 97
    • June 05, 2017, 08:09:04 PM
    • Patmos, Island Of
    more
Is this the right section of the debug? I ran a search for associate and this is what I came up with.
Also, perhaps I missed a step? I followed Togo's guide for Windows. I set up a Rosetta@Home account and I can login with that email/password to their website.
The CPID below doesn't seem to match the one on my Rosetta account.

2018-03-07 21:33:28 GUI: QObject::connect: No such slot DistributedComputingDialog::clicked() in qt/distributedcomputingdialog.cpp:57
2018-03-07 21:33:28 GUI: QObject::connect:  (sender name:   'btnAssociate')
2018-03-07 21:33:28 GUI: QObject::connect:  (receiver name: 'DistributedComputingDialog')
2018-03-07 21:33:28 . model set .
2018-03-07 21:34:56  VerifyDistributedBurnTransaction::PASS for CPID A64253121D79782C27CFAA3429412A64
2018-03-07 21:34:56  VerifyDistributedBurnTransaction::PASS for CPID A64253121D79782C27CFAA3429412A64
2018-03-07 21:35:56 CMasternodeBroadcast::Update -- Got UPDATED Masternode entry: addr=144.202.64.156:40000
2018-03-07 21:36:01 CMasternodeBroadcast::Update -- Got UPDATED Masternode entry: addr=104.238.158.39:40000
2018-03-07 21:38:09 CMasternodeBroadcast::Update -- Got UPDATED Masternode entry: addr=45.32.216.160:40000
2018-03-07 21:38:24 CMasternodeBroadcast::Update -- Got UPDATED Masternode entry: addr=45.32.218.12:40000
2018-03-07 21:38:37 CGovernanceManager::ProcessVote -- Unknown parent object , MN outpoint = f0db4fbdb37c627d55c83fb4bba953b0b01b80a996f86010d02a65a42a8192bc-1, governance object hash = 14ec3b00c46a8f1090be5bc46100e5df547f5e9ed6c3cba8a75ca72b4a9ef572
2018-03-07 21:39:34 RPC error
2018-03-07 21:40:31 CInstantSend::CreateTxLockCandidate -- creating birth, txid=cbc13a395ee8925a48cfa2781cb32734da42490945fcffe2b8c8f0b1a9d503f3
2018-03-07 21:40:31 CInstantSend::CreateTxLockCandidate -- update empty, txid=cbc13a395ee8925a48cfa2781cb32734da42490945fcffe2b8c8f0b1a9d503f3
2018-03-07 21:40:31 CInstantSend::ProcessTxLockRequest -- accepted, txid=cbc13a395ee8925a48cfa2781cb32734da42490945fcffe2b8c8f0b1a9d503f3
2018-03-07 21:40:31  InstantSend : AllOutPointReady 0.000000, IsLockedInstantSendTransaction 0.000000, bool 1.000000


Hmm, I think your the first guy to experience this one , interesting.

Before I comment, could you please ensure wallet is unlocked, has a balance in 'exec stakebalance', and you are able to send money to yourself with this command:

sendtoaddress your_bbp_address 1

?



  • Rob Andrews
  • Administrator

    • 4097


    • 97
    • June 05, 2017, 08:09:04 PM
    • Patmos, Island Of
    more
Hi guys,
Woke up this morning excited to see how we go today!

Lot's of posts! Can I please ask the following for clairty's sake:

1. So it looks like things should change when we reach block 33440? I see Alex's explorer is past that but Togo's not yet. Do we know which one will change to PoDC?

2. I see there is a leisure upgrade available. What are the changes? Should I be updating to this for controller wallet, Sanctuary wallet, PoDC wallet?

3. Should I be doing -zapwallettxes  (now or later) for controller wallet, Sanctuary wallet, PoDC wallet?

4. Anything else I should be doing now?

Many thanks

Welcome back Luke!

1. So it looks like things should change when we reach block 33440? I see Alex's explorer is past that but Togo's not yet. Do we know which one will change to PoDC?

->  Were still ensuring this PODC chain has integrity,  we should know within 25 more blocks or so that it appears solid.  Then we can ask Togo if hes on the same chain as us.


2. I see there is a leisure upgrade available. What are the changes? Should I be updating to this for controller wallet, Sanctuary wallet, PoDC wallet?
->  Actually this leisure is just a couple small items to show more info in exec podcupdate, dont worry about it now, because Im going to be adding another option now for exec podcupdate....  Sancs do not need to upgrade.


3. Should I be doing -zapwallettxes  (now or later) for controller wallet, Sanctuary wallet, PoDC wallet?
-> Only if you have orphaned transactions in your wallet.


4. Anything else I should be doing now?
-> Just check exec getboincinfo to ensure you have full weight on both.





  • sdc
  • Newbie

    • 11


    • 0
    • January 11, 2018, 12:31:32 PM
    more
OK. Just tested the send to myself and it seems to work as a PrivateSend Collateral Payment.
I think my mistake was that my wallet was locked.
I didn't realize that when you put in your password upon opening the Biblepay Core, that it didn't unlock the wallet. I had to click through Settings to unlock and then punch in the password again.
I just tried running another associate, but I'll have to wait for 5 blocks until the last DXBTX clears.