Bible Pay

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Budinga

Pages: 1 [2] 3 4 5 6 7
16
Active Discussions / Re: BEP-20 DECENTRALIZED EXCHANGE
« on: June 30, 2026, 02:16:09 AM »
If you could check again tomorrow; we use an average daily balance method to keep people from scamming us; so over the course of a few days you should see the majority of it.
If not please post a screenshot of the PB screen and just call out which rows are wrong?


Also let me know if you have any trouble testing the Exchange - now that it uses the web wallet.
Maybe post a trade here and ill trade against it - and then check your balance before - and after.

You are correct it now shows in PB, i have actually done a trade last week i think it is the last sell on the list, i did try another one but unfortunately i have ran out of poly for the gas fees.

17
Active Discussions / Re: BEP-20 DECENTRALIZED EXCHANGE
« on: June 29, 2026, 07:26:15 AM »
Its is now working and the address matches. Perfect.

Actually I just realised the amount of BBP is wrong my meta mask wallet has allot more then it shows in PB.

My Address is:
0x5bd39aa8645FdE207A33e09e5E63647B5d1Ef13E



18
Active Discussions / Re: BEP-20 DECENTRALIZED EXCHANGE
« on: June 29, 2026, 02:12:29 AM »
Yeah on the musical coins, I know what you mean; it will be much better having it all in one (metamask only).  The original intent was to make the exchange work easy for people where they would not get all the metamask popups.  They could trade for hours then withdraw the coins later.  But the decentralized ask is much more important where it will interact directly with your coins and no risk of leaving the coins on a web site - so ill get that out very soon - it works in debug.

Could you check the address that pops up for portfolio builder, and make sure it matches your home metamask wallet?  If you still cant see the coins can you post a pic of your portfolio builder and also post your address as text and i can scan it on BNB chain.

Its is now working and the address matches. Perfect.

19
Active Discussions / Re: BEP-20 DECENTRALIZED EXCHANGE
« on: June 26, 2026, 08:29:28 AM »
I get it now, i sent the coins and now i have also put a sell order on the exchange, so far its working as intended. Good Job , but i do think once it works from the metamask wallet it will be less of a musical coins so to speak.

I did notice though that Shib and BBP do not show a stackable assets in portfolio builder, only the BNB.

20
Active Discussions / Re: BEP-20 DECENTRALIZED EXCHANGE
« on: June 26, 2026, 08:25:19 AM »
Glad you are starting to test, man!

You have to send your BEP-20 BBP (some amount of it) and your Shiba to your metamask wallet (not your web wallet).

The PortfolioBuilder (PB) uses the metamask wallet.

Then re-test.   (This is primarily so our investors can leave their large amount of assets over in the Metamask - their wallet their keys - and not on some centralized hot wallet) for the long term rewards.


Note that "currently" the exchange is using the web wallet, but I have a release coming in a day or so that makes it use the metamask wallet also (so that we are fully decentralized) etc.

But we can test all these features in the unchained in the mean time and ill get that out asap.

I get it now, i sent the coins and now i have also put a sell order on the exchange, so far its working as intended. Good Job , but i do think once it works from the metamask wallet it will be less of a musical coins so to speak.

21
Active Discussions / Re: BEP-20 DECENTRALIZED EXCHANGE
« on: June 26, 2026, 03:57:45 AM »
Ok great, yes BNB Peg Shiba:
0x2859e4544C4bB03966803b044A93563Bd2D0DD4D

If you sent a balance to it in your Metamask wallet (not web wallet) it should show a balance in PB?

I had to send to the address in the wallet section and my shib shows in the wallet section, but not in PB. my BNB is showing though. My bbp is the same shows in the bep-20 wallet section but not in PB. am i doing something wrong.

22
Active Discussions / Re: BEP-20 DECENTRALIZED EXCHANGE
« on: June 25, 2026, 05:04:15 AM »
Please do update the wiki page, maybe a nice step by step on the best way to get things started.

I think i have managed to get some BNB in the portfolio builder, I am now trying to get my SHIB to show up, not sure if it is in the right token. I bought Binance-Peg SHIB?

23
Active Discussions / Re: BEP-20 DECENTRALIZED EXCHANGE
« on: June 24, 2026, 03:50:35 AM »
I can make a new wiki page on PortfolioBuilder as Im sure we will need a new one to handle the ERC-20 intricacies.

But let me at least refresh everyones memory on why we have PB for BBP.
Portfolio Builder is a way to combine an up and coming Mainstream and Hopeful leveraged coin with BBP so that in the future your investment theoretically yields multiple % gains (in contrast to say holding Bitcoin+BBP which has already reached a rather high price per coin).  The idea is we team up with a leveraged "hopeful start" such as Shiba or DOGE - a mainstream coin where the pair (both BBP and Shiba for example) appreciate yielding a great potential return in the future.
Second, we are trying to appeal to users who do not know about BBP.  We are appealing to millions of crypto users who have erc-20 (BEP-20) wallets with shiba or another chainlink compatible token to also come to our community, hold some BEP-20 BBP, and receive the homogenized BBP staking reward.  Why would a user want to invest in BBP?  Other than (normal base reasons), they are receiving an apr double the risk free rate (currently 11%) just for holding BBP + SHIBA.  Without BBP they have to turn to services like coinbase to earn stake rewards.

THE MECHANICS OF THE PAIR:
When you hold an equal amount of BEP-20 BBP along with SHIBA (as an example), let us presume you have $1000 of Shiba and $1000 of BBP in your Metamask wallet (not your web wallet):
Lets say this is 10MM SHIB + 10MM BBP.
You use the staking interface to establish the first stake date.  Then we automatically assess new rewards over time (which are not paid automatically) you must type the bible verse.
When you type the verse, the stake payment is made and the date is reset.
You will receive an annualized 11% or so at that time and then the date is reset.

NOTE ON SCENARIOS WHERE YOU HAVE LESS BBP THAN FOREIGN CURRENCY (IN THIS EXAMPLE SHIBA):
If you have 10% BBP (in USD value) and 90% in SHIB you only earn rewards on the first 10%. 
If you have 90% BBP (in USD value) and 10% in SHIB, you only earn half the reward APR on 90% of the BBP.
The system uses an algorithm to match your USD value in BBP up to the USD value in foreign approved tokens.


Does anyone have any questions?

Please do update the wiki page, maybe a nice step by step on the best way to get things started.

24
Same to you Prof.  Hope everyone is doing well.

Happy Easter!

Thank you,

you too my friend.

25
Merry Christmas to All!

Merry Christmas and a Happy New Year to all

26
Unreal, the machine I was testing from on the remote network had a firewall rule to allow the other sancs ports; so it was always giving false positives.
Ok, I see the problem, a rule got erased that existed before on temple1 to allow the port; and of course when I did my telnet yesterday it succeeded so I didnt look for the rule.
I readded the rule and it works now (I was able to test it from Online Port Tester - that it failed then succeeded).
So it should work for you now.
Amazing your the first person that reported this.

Thanks Rob,

Worked like a charm i was starting to think it was me , fantastic.

To be ohnest i did the same i used online port tester and i thought maybe my ISP mite be the issue.


27
Hi Rob,

In the log i just get
10/12/2025 08:52:40: GETTING BBP BALANCE FOR ADDRESS BF3pdwnicqDkHkEbjE729ndk4cXLLEYXFk
10/12/2025 08:52:40: Connecting to sanc1.biblepay.org:20000
10/12/2025 08:53:01: UTXO SET
10/12/2025 08:53:01: BALANCE 0 BBP

on telnet i get
using this command telnet sanc1.biblepay.org 20000
Connecting To sanc1.biblepay.org...Could not open connection to the host, on port 20000: Connect failed

i have norton on my machine but other then that nothing maybe its blocking port 20000 ill try and add rules for that port

i just checked ports are all open

28
Hi Prof B,
So I have some progress for you.
I put the extra logging in PB.exe.  Could you try the following please:
- Close Portfolio Builder
- Close Extensions EXE
- Re-click bbp extensions from the left menu of the core wallet (after the wallet is unlocked)
- Extensions appears
- It should auto upgrade pb.exe up to 1.87
- Launch PortfolioBuilder
- Go to trading room exchange
- Click refresh to get your balance
- Logs in this app are located at:
c:\inetpub\wwwroot\bms\bms.txt
Check log for "12/9/2025 5:54:43 PM: GETTING BBP BALANCE FOR ADDRESS your_address"
Check to see if it receives a utxo set
Plz paste here if it does not
Also when you see the temple host and port that it calls, you may try to telnet to that host and port from the command line and verify your firewall outbound is open on port 20000.

Hi Rob,

In the log i just get
10/12/2025 08:52:40: GETTING BBP BALANCE FOR ADDRESS BF3pdwnicqDkHkEbjE729ndk4cXLLEYXFk
10/12/2025 08:52:40: Connecting to sanc1.biblepay.org:20000
10/12/2025 08:53:01: UTXO SET
10/12/2025 08:53:01: BALANCE 0 BBP

on telnet i get
using this command telnet sanc1.biblepay.org 20000
Connecting To sanc1.biblepay.org...Could not open connection to the host, on port 20000: Connect failed

i have norton on my machine but other then that nothing maybe its blocking port 20000 ill try and add rules for that port

29
FYI: I installed BBP on one of my remote Windows server cloud machines (IE on a faraway network) and tested the pb.exe by funding it with a little BBP and I was able to see the coins; so that eliminates the potential firewall issue.   Ill add some logging to the app and let you know when its ready to test.

Thank you very much Rob, no problem at all i can wait. I'm just glad we can solve it.

30
Ok, so I first went into the PB.exe in debug, and I saw that I had a zero balance, so I bounced Temple1 (which provides the UTXOs back to the c# which gives the sum(balance)).
Then I realized, I had a 0 balance because my wallet spent the coins to myself, so then I funded my address and hit refresh and I could see my balance.
(So now Im not sure if it was the bounce or the other thing).
Anyway, just for the sake of testing, I put your address in my debug code and it was able to see your correct UTXO set and balance.
Can you try now and relaunch it and see if all works fine?

If it does not let me know and we can go further - probably by putting logging in the pb.exe UTXO area for this issue.

Hi Rob,

I tried again also put some more money in to the address but it still shows as 0. Also did wallet repair , refresh, anything else i can try.

Pages: 1 [2] 3 4 5 6 7