Bible Pay

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - earlzmoade

Pages: 1 2 3 4 5 [6] 7 8 9 10 11 12 13 ... 21
76
Sanctuary Discussions / Re: Raspberry pi 4 2gb/4gb
« on: May 15, 2021, 02:52:08 PM »
Quote
Anyway did you buy the phone case to make a case for the pi as a computer or is that just a separate thing?

Yeah, I look forward the day you can run a sanctuary at home on something like a pi with less than 10 watts, maybe on solar power or something.

The phone is just a plain old phone  8)

Yeah i have also been thinking about solar and things, its some intresting ideas for sure.
Would be awesome to see like 1000+ masternodes for biblepay, supporting the network and also sponsoring a child.
Some sort of tiered masternodes i think also could be intresting.
Still i think the 1 masternode 1 orphan is a great thing. 

77
Gdday.

Quote
Hi Earlz,

So although I don't think anything has been discovered that is 'broken' yet I see that we need very in-depth testing for these scenarios to make sure all these high risk staking features are solid (spending them, checking the penalty, the icons etc).

So first of all on the one you were creating from the UI, with the error "must be between 10K-10MM".  Know that in the UI, we simply check to see if you have an *extra* small coin (between 1-1K) available for the utxo-fee (in addition to the stake coin).  Its a little bit of a nuisance, but its possible either the coin control had some coins selected; or you didnt actually have the extra coin...   Could you try again after knowing that no coins are selected in coin control (try a UI checkbox stake) while there is at least one small coin in the wallet?  You can make a small coin with 'banroll 5 1' for example.

On the transaction create failed while spending a high risk stake, I definitely need to know what the coins icon looked like (was it a dove, or was it a chain?).  If it was a dove, I think what probably happened is you selected to spend it, typed in the whole amount and clicked SEND.  This means there was no extra available for change and for the tx fee.  You can safely type in LESS than the amount, and it will just give you change.  I think the problem was simply the tx fee needed more size.

I think we should test about 10 new scenarios, if we can guys.  Can we create some high risk stakes and put them in a little spreadsheet, of varying durations (IE 30 days to 100 days) and test different spending scenarios on those?  As mentioned earlier we will see testnet time go by 24* faster than normal, so the 30 day high risk stake will be mature in only 1.5 days.  Also we can deliberately try to spend a few and see what the hit is.  When you guys do this please look at the coin control icon also, note which stage it is in and verify the stage matches what it should be (IE immature is a chain and its locked etc).

Let me know did I miss anything you guys are testing with high risk?  Or in other areas?

Alright now i Think things are moving forward.

I managed to spend  the  tbbp only highriskstake that i made earlier.

Code: [Select]
17:54:03
highriskbbpstake 777777 365 1


17:54:08
{
  "BBP UTXO": "926c119765f820695028c32ed8a2a8f9ef783c4ffa6a9b5de6a5198e30968edf-11",
  "BBP Address": "yhFqES1X7kY4nSxnLgieZTE3ytCBL3yWrx",
  "BBP Amount": 777777.001,
  "Commitment Days": 365,
  "DWU": 307.064728349887,
  "!WARNING!": "When you promise to lock for 365 days for a high yield reward,  you hereby AGREE that you may be PENALIZED by up to 50% of the value of your UTXO.   If you do not fulfill your obligation, your original UTXO will have burn fees deducted from it.   EXAMPLE:  You have a 100,000 BBP coin.  You lock it for 90 days for a 40% DWU.  On the 15th day you try to spend the coin (breaking your obligation).   You will be penalized 40%*2=80% (capped at 50% max) of your original UTXO.   (If you do not agree please use our conservative staking feature: easybbpstake.)  Thank you for using BIBLEPAY.  ",
  "BBP Value USD": 782.5136147227827,
  "UTXO Value": 1565.027227433385,
  "Results": "The UTXO Stake Contract was created successfully.  Thank you for using BIBLEPAY. ",
  "TXID": "87d4fae09f9cefae4130f78717f65f8a75da6341b12fb77880fec08f54cba173"
}

Like you said :
Quote
On the transaction create failed while spending a high risk stake, I definitely need to know what the coins icon looked like (was it a dove, or was it a chain?).  If it was a dove, I think what probably happened is you selected to spend it, typed in the whole amount and clicked SEND.  This means there was no extra available for change and for the tx fee.  You can safely type in LESS than the amount, and it will just give you change.  I think the problem was simply the tx fee needed more size.

It was the chain one, so i believe i was trying to spend the entire amount like you said and it didnt work for me, although i was sure i tested to just withdraw a bit of it aswell to test and it didnt work, im thinking i didnt calculate in the penalty in the transaction and therefore the transaction didnt work.

Now i set spend to just 10k and the transaction worked , high risk spend.

Code: [Select]
Status: 11 confirmations, locked via ChainLocks
Date: 2021-05-15 10:50
To: yLKSrCjLQFsfVgX8RjdctZ797d54atPjnV
Debit: -388 888.50050000 tBBP
Transaction fee: -0.06575000 tBBP
Net amount: -388 888.56625000 tBBP
Transaction ID: 76b968a7fa7da860b0c805822fc0843fd9f1504e39b212078573881aee4d54ea
Output index: 2
Transaction total size: 263 bytes

Height: 89350
Difficulty: 0.00
Time: 05-15-2021 08:53:22
Subsidy: 7420.6421

Debit: -777 777.00100000 tBBP
Credit: 10 000.00000000 tBBP
To: yWxLzk2tEFSuaw1s2V3rYLrPb6itNi8w7U 10000.0000 BIBLEPAY
Credit: 378 888.43475000 tBBP
To: yVdHJQWeGp1ikiPbmdnqGGTXZFWgudkBQe 378888.0000 BIBLEPAY

looks like i received : 48.71422014279157%  penalty for shorting the highrisk stake.

Then i created Another highriskstake but for 31 days and spent it.

Code: [Select]
10:48:04
highriskbbpstake 2999999 31 1


10:48:05
{
  "BBP UTXO": "2e6ef29f17796ef05e542a061c4c1d31f5ff8f795662a83d637c86f18cd6eee7-0",
  "BBP Address": "yWxLzk2tEFSuaw1s2V3rYLrPb6itNi8w7U",
  "BBP Amount": 2999999.95275,
  "Commitment Days": 31,
  "DWU": 183.8171421328033,
  "!WARNING!": "When you promise to lock for 31 days for a high yield reward,  you hereby AGREE that you may be PENALIZED by up to 50% of the value of your UTXO.   If you do not fulfill your obligation, your original UTXO will have burn fees deducted from it.   EXAMPLE:  You have a 100,000 BBP coin.  You lock it for 90 days for a 40% DWU.  On the 15th day you try to spend the coin (breaking your obligation).   You will be penalized 40%*2=80% (capped at 50% max) of your original UTXO.   (If you do not agree please use our conservative staking feature: easybbpstake.)  Thank you for using BIBLEPAY.  ",
  "BBP Value USD": 1468.41205292861,
  "UTXO Value": 1604.294957848415,
  "Results": "The UTXO Stake Contract was created successfully.  Thank you for using BIBLEPAY. ",
  "TXID": "c44e2f543128125ad5cd2bd5e22ca3e83cd1c245646332109233598160a2985d"

This time it worked aswell.

Code: [Select]
Status: 38 confirmations, locked via ChainLocks
Date: 2021-05-15 14:13
To: yLKSrCjLQFsfVgX8RjdctZ797d54atPjnV
Debit: -1 499 999.97637499 tBBP
Transaction fee: -0.06575000 tBBP
Net amount: -1 500 000.04212499 tBBP
Transaction ID: b54141b62ea5d14484903a238320dfcfcf57cf1eba2b8d1708f5b648ab678a29
Output index: 2
Transaction total size: 262 bytes

Height: 89398
Difficulty: 0.00
Time: 05-15-2021 12:20:42
Subsidy: 7420.6421

Debit: -2 999 999.95275000 tBBP
Credit: 100 000.00000000 tBBP
To: ybnpUQZLECgeM9gS6K8QnjU7tpfZDnJGhv 100000.0000 BIBLEPAY
Credit: 1 399 999.91062501 tBBP
To: yPQaCMUyAGBSnYnhQnTAe5r7jvRvv8AbZ6 1399999.0000 BIBLEPAY

Close to 50%  penalty this time aswell.
Took a screenshot of the final spend, looks solid from here.

Running  command
Code: [Select]
listutxostakes 0 0Showed all my stakes as spent, so good there aswell.

Code: [Select]
17:02:33
listutxostakes 0 0


17:02:33
{
  "87d4fae09f9cefae4130f78717f65f8a75da6341b12fb77880fec08f54cba173": {
    "RiskType": "H",
    "DWU": 330.1866559622127,
    "Sigs": "1-NA",
    "TotalValue": 730.679081890743,
    "Ticker": "BBP",
    "Status": 1,
    "CPK": "yhFqES1X7kY4nSxnLgieZTE3ytCBL3yWrx",
    "BBPAmount": "777777.00000000",
    "ForeignAmount": "0.00000000",
    "BBPValue": "365.34",
    "ForeignValue": "0.00",
    "Commitment": 365,
    "Fulfilled %": 32.59172126426262,
    "Time": 1620662685,
    "Spent": true
  },
  "c44e2f543128125ad5cd2bd5e22ca3e83cd1c245646332109233598160a2985d": {
    "RiskType": "H",
    "DWU": 180.3706241735368,
    "Sigs": "1-NA",
    "TotalValue": 1539.568824622444,
    "Ticker": "BBP",
    "Status": 1,
    "CPK": "yhFqES1X7kY4nSxnLgieZTE3ytCBL3yWrx",
    "BBPAmount": "2999999.95000000",
    "ForeignAmount": "0.00000000",
    "BBPValue": "1409.17",
    "ForeignValue": "0.00",
    "Commitment": 31,
    "Fulfilled %": 20.08670805531364,
    "Time": 1621068528,
    "Spent": true
  },
  "Total BBP": "3777776.95000000",
  "Total Foreign": "0.00000000",
  "Total Hybrid BBP": "3777776.95000000",
  "High Risk Pctg": 0.0215030641866466,
  "DWU": 252.9650150395335
}
EDIT: These tests i did on the v1.6.1.4-Harvest


78
Sanctuary Discussions / Re: Raspberry pi 4 2gb/4gb
« on: May 15, 2021, 08:25:37 AM »
Did it work man?

I never did create a sanc on the pi, it became a monero full node.

I have some future plans of getting one of those  Argon ONE m.2 case simply so i can put in m2 ssd instead of unstable sd card.

If i manage to tinker abit with it im thinking try and get testnet sanc up on it.
Its some pretty awesome little computers these raspberry pi .

Im also looking at the Rock Pi X with emmc module , having x86 and all.

79
Figure i do the referral code test scenario.

Quote
- Attach a portfolio code to your portfolio.  This lets you earn up to 10% more per year if you are able to find 10* the amount of portfolio code "size" than your own portfolio.  For example if you have a 1MM portfolio, and you attach 10MM of codes, you should earn 10% (in a diminishing rate at the decay factor per day).
I will attach a code for you guys now from my testnet portfolio which has 130MM bbp in it:
2a21d83da8a12a078790e763c383dadbb42785916ae5356cdba1f648c73340b4

To attach it do this:
attachreferralcode code

Then after a couple blocks type:
listattachedreferralcodes

And look in the leaderboard, double click on your name and verify the code has a "Referral Rewards" modifier.  This is the factor that your DWU is modified by (in boost).  For example if you have a 50% DWU, and a 1.10 modifier, you will end up with .50*1.1 = .55%  DWU for example.
Note that you also receive a two-way reward when Others attach *your* code.  So please also do a 'generatereferralcode' and paste one of yours here and I will attach yours to my portfolio.


Note that in order to do these tests, you should have a nickname set up in "Edit user record" - be sure your nickname is populated and the record is saved in the chain.

It looks like it went just fine, i attached your referral code Rob.

Code: [Select]
16:29:17
attachreferralcode 2a21d83da8a12a078790e763c383dadbb42785916ae5356cdba1f648c73340b4


16:29:18
{
  "Attached": "7ee3c10d4323303036693a715ff2cdf20346b12b989ac10c1adc149379e17a2a"
}


17:05:24
listattachedreferralcodes


17:05:24
{
  "Details": {
    "2A21D83DA8A12A078790E763C383DADBB42785916AE5356CDBA1F648C73340B4-Claimed-Originator yLbyhFoEurwToxcTrthXoX6Ln7ieMY3sM5-Consumer YHFQES1X7KY4NSXNLGIEZTE3YTCBL3YWRX": 148993648.75,
    "Referral BBP Claimed": 148993648.75,
    "Referral BBP Earned": 0,
    "Total BBP in Portfolio affected": 777777,
    "Portfolio % affected by rewards": 100,
    "Referral Code Effectivity %": 9.847999999999999,
    "Total Portfolio DWU Impact %": 109.848
  },
  "Portfolio Rewards Modifier": 1.09848
}

Here is my referral code:
Code: [Select]
27bc5c80b4cbf728fec8a53a5a0745b39abb0465a83c90a23a288513e89b9789

80
Hello Pat.

Quote
Keep getting this error....Illegal instruction (core dumped)

pat@pat-OptiPlex-760:~/BiblePay/Testnet$ ./biblepay-qt conf=biblepaytest.conf
Illegal instruction (core dumped)

pat@pat-OptiPlex-760:~/BiblePay/Testnet$ dir
biblepay-cli  biblepayd  biblepay-qt  biblepaytest.conf

pat@pat-OptiPlex-760:~/BiblePay/Testnet$ ./biblepay-qt
Illegal instruction (core dumped)

I havent encountered that error code Before, hmmm.
I wonder if it could have something to do with its older cpu thats not support AES or avx etc etc.
Hmm well its just speculation on my end.

Did you compile the wallet yourself or did you just download the binary  and unzip (the easy way) ?
 
I think Rob could do some better troubleshooting with you.
Anyways best of luck to you.



81
Hi Earlz,

Looks like you are a competent IT guy, could you help me out (if you are familiar with Linux), I would really appreciate some help in getting Testnet up and running on a new Ubuntu Desktop…..

Thanks, Pat

Ubuntu 20.04.2 LTS
64-bit

Created directory: home/pat/BiblePay/bbp-lin-develop-64
files in this Folder:
biblepay-cli
biblepayd
biblepay-qt
biblepaytest.conf

From tips from a search, I have run these commands from the command line….
$ sudo apt-get update
$ sudo apt-get install build-essential
$ sudo apt-get install qtcreator
$ sudo apt install qt5-default
$ sudo apt-get install qt5-doc qtbase5-examples qtbase5-doc-html

Evenin Pat.



Looks like you are almost home, just have to set up the biblepay config file.

So i usually just run command 
Code: [Select]
cd ~/biblepay to get into the biblepay folder in the terminal.
then you can run the
Code: [Select]
ls command in terminal to list folders and files inside the biblepay folder.

This being said you should have gotten another file folder when you unzipped the biblepay zip file.
Called
Code: [Select]
.biblepaytest location i think your home folder.
If you dont see the file you will have to click the "show hidden files" button , its right next to the minimize button on the top right.

So Pat you could try this out:
Open up terminal window then :

1
Code: [Select]
cd ~/biblepay2
Code: [Select]
mv biblepaytest.conf /home/pat/.biblepaytest3
Code: [Select]
cd ~/.biblepaytest4
Code: [Select]
nano biblepaytest.confNow you should have gotten nano text editor open and can configurate testnet so to say.  in there just add parameter:
Code: [Select]
testnet=1
debug=1
then you can just hit Ctrl+x  and save the above Changes that you made to the biblepaytest.conf  file.

then just
Code: [Select]
cd ~/biblepaythen
Code: [Select]
./biblepay-qt -conf=biblepaytest.conf
Then i belive it should work for you Pat.
Im no expert either at linux but we learn as we go.
If you wonder anything else or something you  thinking of just give out a shout.

82
Evenin Rob.

Trying to spend the high risk bbp stake i get 2 errors.
First pop up window saying "insufficient funds" and the next one that pops up is "transaction creation failed"

What i tried was target the high risk stake in the coin control have it schecked in then try and send the entire stake to my main test wallet,  i have tested to check/uncheck the box called "subtract fee from amount"  , well it dosent seem to make any diffrence , just that i get another pop up window.
Right now i created a normal tBBP stake to see if i can liquidate that one.
I noticed that from the ui it didnt work for me to make the stake just said "Unable to create UTXO stake , unable to find stake between 10k&10MM older then 24hours" 
So then i tested from the terminal/console

Code: [Select]
19:17:54
easybbpstake 2999999 1


19:17:54
{
  "BBP UTXO": "e429a3d8f8a1204d0816a01cb7364e3fec534c0fce67d43cda7fb3cb68519521-13",
  "BBP Address": "yhFqES1X7kY4nSxnLgieZTE3ytCBL3yWrx",
  "BBP Amount": 3000000.001,
  "Commitment Days": 0,
  "DWU": 168.3734873672299,
  "BBP Value USD": 2334.035517832162,
  "UTXO Value": 2334.03551705415,
  "Results": "The UTXO Stake Contract was created successfully.  Thank you for using BIBLEPAY. ",
  "TXID": "70de2242b1c213d8604cbab69dd6da8a067f9278caf43372d43c4f13e6325c79"
}


Now it worked normal.


So the trouble i have Rob is to simply spend the locked high risk bbp stake so to say.
I believe earlier that i spend a highriskstake but that one was already fulfilled so no penalty there.
Any ideas on ways to spend non fulfilled stake?
Creating the high risk stakes both pure bbp and bbp+foreign currency i have had no problems with.

Anyways while im continuing trying and tinkering im gonna read up on what more test cases you got going.

Talk to you laters.

83
Hello Rob.

Quote
So Earlz will you be able to test the remaining test cases also, like for example the icons and the spend status of the high risk stakes and the referral codes etc?

Yeah ofcourse i wil do the test scenarios  you posted, will try do some tonight, the highrisk stakes and what not.
So yeah stay tuned.

10-4 on the "exec revive sanc", will do aswell.

84
Earlz, have you had a chance to upgrade your sanc 37.120 yet?  The reason I ask is since its a mandatory I think its preventing chainlocks.
Chainlocks and llmq stopped when I upgraded my 3 sancs (which makes sense) but its supposed to recover within 205 blocks.
However when I look on my 3rd sanc it has one connection to your sanc which might be the problem (and 0 connections to my sanc).

EDIT:
I see you upgraded but not sure about your hash - looks like my sanc sees your sanc with a lower hash, here is my hash:
getblockhash 86417
5cae3b49db8c6ab763ad9d952972389a29a2514e392922a24b29958ffbed5578

EDIT II:
It looks like it worked itself out; I rebooted the sanc that had only one connection and it reconnected to one of my others and chainlocks and llmq continued; and they started to ddos your sanc so it looks like in prod this would resolve itself.

Mornin.

'Yeah i had around 7 hours downtime the other night , isp have some trouble with mobile connections over here.

I ran your getblockhash command on sanc and got :
Code: [Select]
bbpmn@bbpmn-VirtualBox:~/biblepay$ ./biblepay-cli getblockhash 86417
5cae3b49db8c6ab763ad9d952972389a29a2514e392922a24b29958ffbed5578
Comparing to yours : getblockhash 86417
5cae3b49db8c6ab763ad9d952972389a29a2514e392922a24b29958ffbed5578

Looks the same to me.

Some other info i get :
Code: [Select]
bbpmn@bbpmn-VirtualBox:~/biblepay$ ./biblepay-cli masternode status
{
  "outpoint": "0000000000000000000000000000000000000000000000000000000000000000-4294967295",
  "service": "37.120.153.54:40001",
  "state": "POSE_BANNED",
  "status": "Masternode was PoSe banned"
}
bbpmn@bbpmn-VirtualBox:~/biblepay$

Code: [Select]
bbpmn@bbpmn-VirtualBox:~/biblepay$ ./biblepay-cli -getinfo
{
  "version": 1060104,
  "protocolversion": 70772,
  "walletversion": 61000,
  "balance": 0.00000000,
  "blocks": 86898,
  "timeoffset": 0,
  "connections": 5,
  "proxy": "",
  "difficulty": 2.632266129353999e-05,
  "testnet": true,
  "privatesend_balance": 0.00000000,
  "keypoololdest": 1618251858,
  "keypoolsize": 1000,
  "paytxfee": 0.00000000,
  "relayfee": 0.25000000,
  "warnings": ""
}

Code: [Select]
bbpmn@bbpmn-VirtualBox:~/biblepay$ ./biblepay-cli mnsync status
{
  "AssetID": 999,
  "AssetName": "MASTERNODE_SYNC_FINISHED",
  "AssetStartTime": 1620360168,
  "Attempt": 0,
  "IsBlockchainSynced": true,
  "IsSynced": true
}


85
Hello Rob.

I have been busy at work now so i havent been able to do much testing, last time i tried to liquidate a locked stake  it did not work for me, but i will retry this new verison you put out and ofcourse
I see you updated with new testcases.

Quote
QUESTION:

Do any of you have experience in running a Microsoft ASPX based web server and experience in SQL and/or c# programming?  The reason I ask is we are developing a new technology, called the 'biblepay DLL' that allows c# IT organizations (and developers) run a web server that hosts decentralized pages driven by DSQL queries.  Whoever is interested in testing this, I would like to make a wiki to explain how to install it and program it.

Sadly i have no experience of such things.

In the coming days i will do some more testing, exciting times Rob!
Have a good one Brother.

86
** FIVE MORE PAKISTAN WELLS HAVE BEEN COMPLETED! **


I am very pleased to announce that our 5 tube wells in Pakistan (from project https://forum.biblepay.org/index.php?topic=766.msg10785#msg10785) are complete!  Now approximately up to 1000 children in 5 areas can have perpetual water for free!


We numbered them wells #14, 15, 16, 17, and 18!

See project here starting with #14:

https://foundation.biblepay.org/Wells

Praise God for enabling us to facilitate this project for his children!  May God bless us with future revenue to complete more projects soon.
Hello Brother Rob.
Man thats awesome!
Things sure went fast this time.
Been scrolling thru the pictures/videos, something special seeing projects come to life.

Looking forward to future  endeavors.



87
Hello Rob.

I ran this command in console/terminal :
Code: [Select]
20:57:36
highriskbbpstake


20:57:36
You must specify highriskbbpstake minimum_bbp_amount commitment_days 0=dry_run/1=real (code -1)

I noticed 
Quote
minimum_bbp_amount commitment_days 0=dry_run/1=real
Should be switched right, like this: highriskbbpstake bbp_amount 1 duration_in_days



88
** Highly Positive for BiblePay **

BiblePay's difficulty for RandomX has been increasing all day, from 10, now to 63.  This is 800% higher than normal!

This is extremely good news, praise God!

Yeah its pretty cool.
I have had some intresting discussions on monero reddit with cpu miners, telling people you can merge mine with biblepay, get some extra profit that you can restake or sell if you want.

Well people i have talked to have been really positive, intrested in what this project is.


89
Hi Earlz,

Btw, just so you know, when you type our 'exec revivesanc sancname' command we not only send the proreg update_service command (to unpose ban a sanc) but we also send the params that allow the change of IP and/or port (similar to if you changed hosts).  So to accomplish that all you have to do is edit your deterministic.conf first, change the ip or port, then run the revivesanc.  That should change the IP *and* unpose all at the same time.  Ive moved a few of my sancs in prod this way to preserve the POOS orphan public key BIO.

10-4 on the highriskstake, let me know if the amount was roughly correct.  I think we should cap the penalty at 50% in the next release to create a propensity for people to 'get out early' and not give us a black eye, etc.  It also provides some revenue for the high risk pool.  Im sort of leaning against the super long duration stakes, I think maybe we should leave the curve at 2 years for now.  The reason why is I made a time-of-money chart,and I feel if we offer the super long term stakes we risk spending too much on interest expenses which might make us look like we have slightly less integrity.  We can revisit those super long ones later after we see the effects of referral codes and highrisk stakes in prod (maybe under a different design for example).

I need to add the CPK, nickname, and portfolio size to the 'listattachedreferralcodes' rpc also so we can see who we attached to.  This will provide more transparency so people can audit the entire system etc and know that we arent wasting more than a few percent on referral code emissions etc.  And also that no one is getting a disproportionate size of referral code revenue.

Cheers Rob.
Thats some sweet information.
Yeah im thinking if i keep having trouble with this particular IP  then i will ask them to change to some other static ip.
Anyways i revived the sanctuary and it looks like it was a success , also booted up the VM with the sanc and it looks fine over there.

Alright let me see if i can get some highriskstaking done.

90
Hello Rob.

Yeah i will get the sanc up again asap. I have open support ticket at torguard, lets see how fast they fix it for me.  If they have to change my dedicated ip then well worst case i have to make new sanctuary i suppose.
Should go easier now when i kinda know procedure so to say.

I tried to send a highriskstake to my normal test wallet adress but i received 2 diffrent popup errors from it, i will redo highriskstake and see if i can  liquidate early.

 

Pages: 1 2 3 4 5 [6] 7 8 9 10 11 12 13 ... 21