Recent Posts

61

BiblePay Current Discussion / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

« Last post by Rob Andrews on December 10, 2025, 05:59:52 AM »

Rob,
Can we start an online show with you? give me 6 hours a month I'll do all the recordings editing and promotion
No strings attached...

Hi Mr. A,
No not at this time.  I dont have 15 minutes extra per month at this time.
Thanks.
Ill let you know when I have all the financial pieces ready to merge in the API and we can probably do something at that time.

On a side note, I did attempt to have a one hour per week prayer call for two years and no one showed up except Pat and his friend (at least we got through it however and it was edifying).  That will be something we can discuss in the future once BBP has sort of a full suite running again.  A weekly prayer call for the nations.

62

BiblePay Current Discussion / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

« Last post by Budinga on December 10, 2025, 03:00:11 AM »

Hi Rob,

In the log i just get
10/12/2025 08:52:40: GETTING BBP BALANCE FOR ADDRESS BF3pdwnicqDkHkEbjE729ndk4cXLLEYXFk
10/12/2025 08:52:40: Connecting to sanc1.biblepay.org:20000
10/12/2025 08:53:01: UTXO SET
10/12/2025 08:53:01: BALANCE 0 BBP

on telnet i get
using this command telnet sanc1.biblepay.org 20000
Connecting To sanc1.biblepay.org...Could not open connection to the host, on port 20000: Connect failed

i have norton on my machine but other then that nothing maybe its blocking port 20000 ill try and add rules for that port

i just checked ports are all open

63

BiblePay Current Discussion / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

« Last post by Budinga on December 10, 2025, 02:57:54 AM »

Hi Prof B,
So I have some progress for you.
I put the extra logging in PB.exe.  Could you try the following please:
- Close Portfolio Builder
- Close Extensions EXE
- Re-click bbp extensions from the left menu of the core wallet (after the wallet is unlocked)
- Extensions appears
- It should auto upgrade pb.exe up to 1.87
- Launch PortfolioBuilder
- Go to trading room exchange
- Click refresh to get your balance
- Logs in this app are located at:
c:\inetpub\wwwroot\bms\bms.txt
Check log for "12/9/2025 5:54:43 PM: GETTING BBP BALANCE FOR ADDRESS your_address"
Check to see if it receives a utxo set
Plz paste here if it does not
Also when you see the temple host and port that it calls, you may try to telnet to that host and port from the command line and verify your firewall outbound is open on port 20000.

Hi Rob,

In the log i just get
10/12/2025 08:52:40: GETTING BBP BALANCE FOR ADDRESS BF3pdwnicqDkHkEbjE729ndk4cXLLEYXFk
10/12/2025 08:52:40: Connecting to sanc1.biblepay.org:20000
10/12/2025 08:53:01: UTXO SET
10/12/2025 08:53:01: BALANCE 0 BBP

on telnet i get
using this command telnet sanc1.biblepay.org 20000
Connecting To sanc1.biblepay.org...Could not open connection to the host, on port 20000: Connect failed

i have norton on my machine but other then that nothing maybe its blocking port 20000 ill try and add rules for that port

64

BiblePay Current Discussion / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

« Last post by MR.A on December 09, 2025, 10:30:57 PM »

Rob,
Can we start an online show with you? give me 6 hours a month I'll do all the recordings editing and promotion
No strings attached...

65

BiblePay Current Discussion / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

« Last post by Rob Andrews on December 09, 2025, 06:02:28 PM »

Thank you very much Rob, no problem at all i can wait. I'm just glad we can solve it.

Hi Prof B,
So I have some progress for you.
I put the extra logging in PB.exe.  Could you try the following please:
- Close Portfolio Builder
- Close Extensions EXE
- Re-click bbp extensions from the left menu of the core wallet (after the wallet is unlocked)
- Extensions appears
- It should auto upgrade pb.exe up to 1.87
- Launch PortfolioBuilder
- Go to trading room exchange
- Click refresh to get your balance
- Logs in this app are located at:
c:\inetpub\wwwroot\bms\bms.txt
Check log for "12/9/2025 5:54:43 PM: GETTING BBP BALANCE FOR ADDRESS your_address"
Check to see if it receives a utxo set
Plz paste here if it does not
Also when you see the temple host and port that it calls, you may try to telnet to that host and port from the command line and verify your firewall outbound is open on port 20000.

66

BiblePay Current Discussion / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

« Last post by Budinga on December 09, 2025, 07:20:56 AM »

FYI: I installed BBP on one of my remote Windows server cloud machines (IE on a faraway network) and tested the pb.exe by funding it with a little BBP and I was able to see the coins; so that eliminates the potential firewall issue.   Ill add some logging to the app and let you know when its ready to test.

Thank you very much Rob, no problem at all i can wait. I'm just glad we can solve it.

67

BiblePay Current Discussion / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

« Last post by Rob Andrews on December 09, 2025, 06:16:40 AM »

Hi Rob,

I tried again also put some more money in to the address but it still shows as 0. Also did wallet repair , refresh, anything else i can try.

FYI: I installed BBP on one of my remote Windows server cloud machines (IE on a faraway network) and tested the pb.exe by funding it with a little BBP and I was able to see the coins; so that eliminates the potential firewall issue.   Ill add some logging to the app and let you know when its ready to test.

68

BiblePay Current Discussion / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

« Last post by Rob Andrews on December 09, 2025, 06:04:42 AM »

Hi Rob,

I tried again also put some more money in to the address but it still shows as 0. Also did wallet repair , refresh, anything else i can try.

Ok, no problem, at least we have a clear idea where the issue is now.  Ill add some detailed logging in that area and let you know when its ready to test.

Thanks.

69

BiblePay Current Discussion / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

« Last post by Budinga on December 09, 2025, 01:52:22 AM »

Ok, so I first went into the PB.exe in debug, and I saw that I had a zero balance, so I bounced Temple1 (which provides the UTXOs back to the c# which gives the sum(balance)).
Then I realized, I had a 0 balance because my wallet spent the coins to myself, so then I funded my address and hit refresh and I could see my balance.
(So now Im not sure if it was the bounce or the other thing).
Anyway, just for the sake of testing, I put your address in my debug code and it was able to see your correct UTXO set and balance.
Can you try now and relaunch it and see if all works fine?

If it does not let me know and we can go further - probably by putting logging in the pb.exe UTXO area for this issue.

Hi Rob,

I tried again also put some more money in to the address but it still shows as 0. Also did wallet repair , refresh, anything else i can try.

70

BiblePay Current Discussion / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

« Last post by Rob Andrews on December 08, 2025, 08:23:45 AM »

Thank you

Ok, so I first went into the PB.exe in debug, and I saw that I had a zero balance, so I bounced Temple1 (which provides the UTXOs back to the c# which gives the sum(balance)).
Then I realized, I had a 0 balance because my wallet spent the coins to myself, so then I funded my address and hit refresh and I could see my balance.
(So now Im not sure if it was the bounce or the other thing).
Anyway, just for the sake of testing, I put your address in my debug code and it was able to see your correct UTXO set and balance.
Can you try now and relaunch it and see if all works fine?

If it does not let me know and we can go further - probably by putting logging in the pb.exe UTXO area for this issue.