Messages

1

BiblePay Current Discussion / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

« on: March 27, 2024, 09:57:33 AM »

Hi bro Ale,
So just want to point out, the main point of having a sanc servicing the BBP network is being there to provide instant send services and block forwarding and randomx mining (as that only happens on the sancs now).  If your node is not public there is no way for other nodes to reach your node, so hence the reduced reward.

More specifically you have to have port 40000 exposed to the world.  You can test it like this (use my 1st sanc as an example):
telnet sanc1.biblepay.org 40000

If the screen clears you know its exposed publically.

Good luck.
(NAT is a separate topic.  You can technically still NAT on your LAN, but you just need the port exposed publically for other nodes to reach your node).

Hi Bro Rob,
my IP and port is exposed to the world and it's reachable from outside of my LAN but still the same problem.

When I write the "msaternode status command I have this results:

16:52:31
masternode status

16:52:32
{
  "outpoint": "0000000000000000000000000000000000000000000000000000000000000000-4294967295",
  "service": "[::]:0",
  "state": "ERROR",
  "status": "Error. Can't detect valid external address. Please consider using the externalip configuration option if problem persists. Make sure to use IPv4 address only."
}


Thats all,

Thank you
Ale



 

2

BiblePay Current Discussion / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

« on: March 19, 2024, 04:24:01 AM »

No problem, can you please paste your TXID of your collateral and the amount you are using here, and Ill check the collateral using getrawtransaction?

Thanks!

Rob I think I solve the issue, but now the error is that is not possible to find a pubblic IP address.
So, i cannot use the masternode on a NATTED network ?

Ale

3

BiblePay Current Discussion / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

« on: March 11, 2024, 08:28:39 AM »

No, thats cool, I dont mind going into more detail where need be.  We also do have some wiki guides on some of these concepts and when one is discovered that is really necessary to document we do make an end-to-end tutorial as a wiki.

First of the reason there are 3 flavors of Sancs now is because some people cant afford 4.55MM bbp for a sanctuary; so now we offer one flavor of sanc for 455,001 bbp and also a Temple for 45MM bbp.  They each have really the same reward (IE the altar pays 10%, the Sanc 100% and the Temple 1000%).

With a sanc you get a bigger reward because its doing the randomx mining in the pool, and you end up with the entire block reward every time your deterministic sanctuary is scheduled for payment. 

If you are an investor you will get 50% of the reward, but an active hosted sanc on a VM, you get 100%.




I would suggest to go back to the release where we ask you to create a deterministic sanctuary, and simply ask questions on any area that is confusing and I can try to help.
Most of this documentation was already established dash; so any terminology on the basics, you can get that from googling that term and Dash Masternode.

Weve simply enhanced and extended those Masternodes to become deterministic sancs with different sizes, and we ported the block miner into the sanc.  And we added the 50% active/passive rules.

Here is the guide to set up a sanc:
https://wiki.biblepay.org/Create_Sanctuary

Just let me know what you need help with.  If you simply want to set up one without renting an actual VM (IE as a passive investor) you just follow the guide, but you point it to your own IP address.

Substitute the 4,500,001 with 450001 to create an altar.

Hi Rob
I'm still stuck with the error belowe

15:25:29
exec upgradesanc AltareSanto 1

15:25:29
bad-protx-collateral-check-proreg-tx (code 16) (code -1)

Thanks
Ale

4

BiblePay Current Discussion / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

« on: November 21, 2023, 08:03:05 AM »

1) When you originally ran the upgradesanc command on your sanc altare, it would have appended an entry to deterministic.conf in %appdata%\biblepay.
2) Plz open your deterministic.conf file and ensure that entry is created.


Re-reading your post, I see you mentioned this
"15:52:33
You must specify exec upgradesanc/createsanc sanctuary_name (where the sanctuary_name matches the name in the masternode.conf file) 0/1 (where 0=dry-run, 1=real).   NOTE:  Please be sure your masternode.conf has a carriage return after the end of every sanctuary entry (otherwise we can't parse each entry correctly).  (code -1)"

So actually I see your upgradesanc command didnt run.
Please try again with this instead:
upgradesanc altare 1

You just need the "1" in there to run the command for real.  A "0" means to Test first.

Thanks Rob,
So first of all in the location " %appdata%/Biblepay " there isen't the file " deterministic.conf ". I create it manually

After execution of " upgradesanc altare 1 " i have the error belowe:
14:56:29
exec upgradesanc altare 1
4:56:30
bad-protx-collateral-check-proreg-tx (code 16) (code -1) 

I think the 1st issue is on a create the sanctuary altar but really don't understand why.

Thanks
Ale

5

BiblePay Current Discussion / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

« on: November 14, 2023, 08:54:09 AM »

What kind of issue are you having?
Maybe what leads up to it also, thanks!

15:50:39
exec revivesanc altare


15:50:39
{
  "Command": "revivesanc",
  "Error": "Unable to find sanctuary altare in deterministic.conf file."
}


15:52:23
exec exec upgradesanc altare


15:52:23
{
  "Command": "exec",
  "Error": "Command not found"
}


15:52:33
exec upgradesanc altare


15:52:33
You must specify exec upgradesanc/createsanc sanctuary_name (where the sanctuary_name matches the name in the masternode.conf file) 0/1 (where 0=dry-run, 1=real).   NOTE:  Please be sure your masternode.conf has a carriage return after the end of every sanctuary entry (otherwise we can't parse each entry correctly).  (code -1)


15:53:10
exec upgradesanc altare


15:53:10
You must specify exec upgradesanc/createsanc sanctuary_name (where the sanctuary_name matches the name in the masternode.conf file) 0/1 (where 0=dry-run, 1=real).   NOTE:  Please be sure your masternode.conf has a carriage return after the end of every sanctuary entry (otherwise we can't parse each entry correctly).  (code -1)


15:53:15
exec revivesanc altare


15:53:15
{
  "Command": "revivesanc",
  "Error": "Unable to find sanctuary altare in deterministic.conf file."
}

6

BiblePay Current Discussion / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

« on: November 10, 2023, 09:40:20 AM »

Dear all,
I try to installa an Altar but there are some errors using the easysanc procedure
Is there a post where reading the instrutoction ?

Thanks

7

BiblePay Current Discussion / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

« on: June 27, 2023, 09:12:43 AM »

Hi Alex,

Yes sir, still 4,500,001 and the easiest way it to use the EasySanc instructions up in the red sea release.

Mmmmhhhh
I need at least 3.700.000
 

8

BiblePay Current Discussion / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

« on: June 22, 2023, 08:36:39 AM »

Hi Lalex,

Hey, thanks a lot!  That makes it worth programming.
Yeah, I havent had time to call my mom so I don't have much time to call today but thank you for sharing that. 
I did put a hardware phone in my sons room last night and now we can call each other with BBP phone #s!  (I want to make it so you can associate one BBP key per phone extension but thats not released in the UI yet).

However I do think the hardware phone will be ready within 30 days if anyone wants to buy one!

Also, if anyone finds they can't call their favorite country or don't have the correct rates for a certain country, just let me know and we can add that country to our phone system.

Rob,
don't worry about the call I'm joking with it ...
By the way we still need 4.500.001 BBP to start a new sanct ?

cheers
Ale

9

BiblePay Current Discussion / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

« on: June 20, 2023, 10:58:19 AM »

Rob, the softphone is awesome.

I have an Atlanta phone number, so you have to call me so I can say hi.
This is crazy... I love it

I would like to start the sanctuary in the next few days perhaps I will ask for some help.

However my phone number BBP is 0014706047011

Thanks a lot...

10

BiblePay Current Discussion / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

« on: May 25, 2023, 04:28:58 AM »

Dear all,
Is there a valid pool to start mining again ?

Rob, what you need to test I don't have to much time but I can help you...

Alex

11

BiblePay Current Discussion / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

« on: April 13, 2023, 11:01:19 AM »

I just updated our Wells page to be more modern, and also added our latest new well:

https://unchained.biblepay.org/bbp/wells

Hi Rob and all, Unchained is still off line

But Happy Easter ( little late ) to everyone...