Messages

346

TestNet Discussion Archive / Re: BIBLEPAY -TESTNET TESTING THREAD-Proof-Of-Distributed-Computing(Cancer Research)

« on: February 08, 2018, 02:27:35 PM »

Oh awesome, good.  Would you like to test it now?

masternode status
Should return Active?

Then post 'exec testvote'

Your on the latest, 1088q correct?

I'm having a slight problem because I used a new wallet. The force command doesnt seem to be working when using my old rosetta account. it still says already in chain. ie. exec associate email pass force

347

TestNet Discussion Archive / Re: BIBLEPAY -TESTNET TESTING THREAD-Proof-Of-Distributed-Computing(Cancer Research)

« on: February 08, 2018, 02:21:22 PM »

Hi Mike,

I didnt have that, but I see someone else did here :

https://bbs.archlinux.org/viewtopic.php?id=230828

Rob

Figured it out, had to start the vncserver from the same account as the biblepay daemon.

348

TestNet Discussion Archive / Re: BIBLEPAY -TESTNET TESTING THREAD-Proof-Of-Distributed-Computing(Cancer Research)

« on: February 08, 2018, 01:29:19 PM »

Rob,

When I try to run -qt through the vnc session i get Invalid MIT-MAGIC-COOKIE-1 keyQXcbConnection: Could not connect to display :1.0.

Do you know how to fix this?

Thanks.

-tmike

349

TestNet Discussion Archive / Re: BIBLEPAY -TESTNET TESTING THREAD-Proof-Of-Distributed-Computing(Cancer Research)

« on: February 08, 2018, 10:34:57 AM »

Yeah, I installed graphics on all my VMS, that would make this easier.  Thanks!

Rob, I just realized this will take a while since i have to recompile to source code with QT.

350

TestNet Discussion Archive / Re: BIBLEPAY -TESTNET TESTING THREAD-Proof-Of-Distributed-Computing(Cancer Research)

« on: February 08, 2018, 09:16:14 AM »

Rob,

This is interesting because now for the people that were running Rosetta already, they just need to install the wallet and link their CPID. They can now turn their number crunching into money if so desired. In fact, it is so easy to install the wallet that it's a no brainer. If half of the computational power signs up for Biblepay, what do you estimate the payout to be for one normal computer? Like an i5 or i7 processor. I'm thinking the payout will be very small then.

I have one suggestion, since you have contacts with the people behind BOINC. Can you e-mail then to have some of them install the wallet? That would probably get you many CPIDs on the testnet fast adn it doesn't really cost them anything.

351

TestNet Discussion Archive / Re: BIBLEPAY -TESTNET TESTING THREAD-Proof-Of-Distributed-Computing(Cancer Research)

« on: February 08, 2018, 08:53:55 AM »

Hmm, I just remembered something, there is a very complex command in the DCC Filter, something that is done in QT (otherwise we need a new lib in headless, and the exchanges dont like unecessary libs on their native machines) so I did it in QT.. Im thinking, we may need to have you run your hot sanc in -qt mode.  Do you have graphics on that ubuntu box, and can you launch the hot sanc like this:
./biblepay-qt -testnet

?

Need to rule that out.

I can try, it's on a VPS so I need to install x on it or something. I'll let you know.

352

TestNet Discussion Archive / Re: BIBLEPAY -TESTNET TESTING THREAD-Proof-Of-Distributed-Computing(Cancer Research)

« on: February 08, 2018, 08:46:45 AM »

Which flavor OS is your hot sanc?  Also, do you now have a user file in /SAN?

Still no file. Ubuntu 16.04.3 LTS, kernel version 4.13.0-1008-gcp.

353

TestNet Discussion Archive / Re: BIBLEPAY -TESTNET TESTING THREAD-Proof-Of-Distributed-Computing(Cancer Research)

« on: February 08, 2018, 08:44:18 AM »

Oh btw, the exec testvote, and all DCC file hash testing must be done on the hot sanc.

Yes, I'm running all the commands on the hot sanctuary.

354

TestNet Discussion Archive / Re: BIBLEPAY -TESTNET TESTING THREAD-Proof-Of-Distributed-Computing(Cancer Research)

« on: February 08, 2018, 08:40:48 AM »

Actually a live quorum test might explain 75% of the process, since your DCC is working now.

Could you post the result of 'exec testvote'?

Your SAN directory should have something in it now - the Filtered file should be 1281 bytes (thats our Biblepay researcher list)

The exec testvote, file hash "filehash" for the DCC filehash, should be:
000000000000000000000000000000008d18b23d463c9e866cb5db0f02262506

?

Hmm, it says:
error code: -1
error message:
boost::filesystem::last_write_time: No such file or directory: "/home/biblepay/.biblepaycore/SAN/magnitude"

MY sanctuary is this one by the way:
"749df434020e56e87a48607eaa1cbd504fcc62eb90056a39d2d58c315b9ebda4-1": "ENABLED",

355

TestNet Discussion Archive / Re: BIBLEPAY -TESTNET TESTING THREAD-Proof-Of-Distributed-Computing(Cancer Research)

« on: February 08, 2018, 08:35:45 AM »

LOL, yeah the first couple I set up were tricky now for some reason they seem easy. 
Uhh, I would just be happy if you did a couple, because I think we only need 10 total sancs in testnet to prove the quorum side features are all working correctly, lets talk about that soon.
But in the mean time, I would definitely like to get 50 boinc cpids out here, because not only do I want to get a feel and give everyone a taste of what we would be doing, but also to test the superblock frequency and verify the payments per mangitude and all the security.

I have 2 running, so if you did 2 + Togos, we would be halfway there.

Ill start getting the commands to show what rules the sancs go through in the morning.

Sure, just let me know when. The only problem right now is I only have enough tBBP for one more. You have my e-mail, it's a headache trying to keep up with the forum. How many cpids are running right now?

356

TestNet Discussion Archive / Re: BIBLEPAY -TESTNET TESTING THREAD-Proof-Of-Distributed-Computing(Cancer Research)

« on: February 08, 2018, 08:30:34 AM »

Aha!  Ok the st13 last_writetime_error is fixed for the next testnet version later today.

In the mean time, anyone who has either run into the problem , or never experienced the problem type:
exec dcc

You should see "1".
This fixes the problem temporarily until the next release.

Great! Thanks.

357

TestNet Discussion Archive / Re: BIBLEPAY -TESTNET TESTING THREAD-Proof-Of-Distributed-Computing(Cancer Research)

« on: February 08, 2018, 08:25:11 AM »

On the hot sanc, all you really have to do is send the collateral to yourself (the 500,000 even), then add:
masternode=1
masternodeprivkey=yyyyy

In the biblepay.conf, and leave the masternode.conf alone.  (On the testnet sanctuary itself).

You could monitor it in windows, but since testnet is so small I would just click on Sanctuaries on the windows wallet and look by IP.

I dont know if the hot sanc vout will be possible to add to your Win pc, but if you wanted to try : you would copy the 'masternode output' (from the sanctuary itself) TXID & VOUT n to your notepad, then construct the masternode.conf file on the windows PC to include it.  Probably not worth it as it might hose your prod file, etc.  I would just look for the sanc in the list.

Alright, I'm not going to try it. I literally spend all day setting up the testnet masternode yesterday. How many masternodes do we need? I can potentially host 10 of them by cloning but I don't want to do that until it's needed.

358

TestNet Discussion Archive / Re: BIBLEPAY -TESTNET TESTING THREAD-Proof-Of-Distributed-Computing(Cancer Research)

« on: February 08, 2018, 08:15:08 AM »

The error stopped by the way, haven't seen one today although there is still no file in SAN.

359

TestNet Discussion Archive / Re: BIBLEPAY -TESTNET TESTING THREAD-Proof-Of-Distributed-Computing(Cancer Research)

« on: February 08, 2018, 08:13:29 AM »

Thanks!  When you did the 'exec dcc' did it say 1?  Also could you please try again while tailing the log and see if there is a bug in there (an error)?

Thanks!

Yes, it said 1.

Do you meen the debug.log?

2018-02-07 19:41:41 Biblepay Core version 1.0.8.8 (2018-02-07 07:42:02 -0600)
2018-02-07 19:41:41 InitParameterInteraction: parameter interaction: -whitelistforcerelay=1 -> setting -whitelistrelay=1
2018-02-07 19:41:41 ***************************************** BIBLEPAY  ***************************************************
2018-02-07 19:41:41 ProdMode: Prod 0.000000Using BerkeleyDB version Berkeley DB 4.8.30: (April  9, 2010)
2018-02-07 19:41:41 BiblePayVersion 1.0.8.8 (2018-02-07 07:42:02 -0600)
2018-02-07 19:41:41 Using OpenSSL version OpenSSL 1.0.2g  1 Mar 2016
2018-02-07 19:41:41 Default data directory /home/biblepay/.biblepaycore
2018-02-07 19:41:41 Using data directory /home/biblepay/.biblepaycore/testnet3
2018-02-07 19:41:41 Using config file /home/biblepay/.biblepaycore/biblepay.conf
2018-02-07 19:41:41 Using at most 125 connections (1024 file descriptors available)
2018-02-07 19:41:41 Using 0 threads for script verification
2018-02-07 19:41:41 scheduler thread start
2018-02-07 19:41:41 HTTP: creating work queue of depth 16
2018-02-07 19:41:41 No rpcpassword set - using random cookie authentication
2018-02-07 19:41:41 Generated RPC authentication cookie /home/biblepay/.biblepaycore/testnet3/.cookie
2018-02-07 19:41:41 HTTP: starting 4 worker threads
2018-02-07 19:41:41 Creating backup folder /home/biblepay/.biblepaycore/testnet3/backups
2018-02-07 19:41:41 Using wallet wallet.dat

360

TestNet Discussion Archive / Re: BIBLEPAY -TESTNET TESTING THREAD-Proof-Of-Distributed-Computing(Cancer Research)

« on: February 08, 2018, 08:09:19 AM »

Can I monitor the hot Sanctuary from my windows wallet? Do I just need to fill in biblepay.conf or masternode.conf or both? Thanks.