Bible Pay

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Rob Andrews

Pages: 1 ... 105 106 107 108 109 110 111 [112] 113 114 115 116 117 118 119 ... 263
1666
** New RandomX Mining Calculator Ready for Testing **

https://foundation.biblepay.org/MiningCalculator


I believe all we need to do is make two of the values update dynamically in the future. 

Please test the math, seasoned miners.

At this point in the game, BBP pays twice as much as XMR to mine.

1667
hello i am using the new miner , and i am starting to see a lot of stale bbp shares  the difficulty seems to low .. i know you use a verdiff however the old poo has set difficulty ports   and my reject were almost zero
 
020-04-19 04:17:44.213]  cpu  rejected (0/1) diff 1 [7] BBP "Stale" (128 ms)
[2020-04-19 04:17:47.198]  cpu  accepted (1/1) diff 75000 [116359] XMR (1005 ms)
[2020-04-19 04:17:52.765]  cpu  accepted (2/1) diff 75000 [188941] XMR (1312 ms)
[2020-04-19 04:17:54.245]  cpu  rejected (2/2) diff 1 [2] BBP "Stale" (128 ms)
[2020-04-19 04:18:03.665]  cpu  accepted (3/2) diff 75000 [117940] XMR (1428 ms)
[2020-04-19 04:18:24.657] speed 10s/60s/15m 5399.3 661.1 n/a H/s max 5466.9 H/s
[2020-0

Stale share levels on the pool look normal, and the pool does use vardiff on 3001.

Please paste your bbpaddress and Ill look at the log.


1668
Is the DDoS'ing you are experiencing partly caused by the spam that got through?

Thank you!
Well actually on the forum, once we turned the medium level captcha on (this was part of SMF), the new spam accounts stopped.  It does bring up a good point though, we should go and clean up any old spam that got in back then - I just made a todo note for that.

No, in this case, this was specific to the foundations RX pool.  Some wiseguys were hitting certain ports (I believe for brute force hacking) and this left the ports open with TIME_WAIT which caused port exhaustion.  I figured out later that the default windows firewall had some ports for SAMBA enabled, and disabling those finally stopped that vulnerability.

We also had to add some ban rules in the pool that close sockets if they get abused.

I think its becoming stable now, God willing. 


1669
OK - now its working. Not sure what the problem was?

If you have less than 100 machines, probably a special character on the server side that is handled properly.


1670
Hi Rob,
Getting nothing from stratum+tcp://foundation.biblepay.org:3001, except 'read error: "connection reset by peer"'.
I was fine working with 5.10.0, but as soon as I tried XMRig 5.10.1, this happened. I tried to go back, but received the same.

Any help is highly appreciated!
Good to see you have migrated!

So it turns out the whole problem had very little to do with the socket exhaustion fix, but some type of special character.
I believe this has been fixed a couple mins ago; please try now.


1671
Im currently out chopping Wood for coming Winter, but i Went to check miner and like you said Rob miner began mining away after around 20 minutes.

Code: [Select]
[2020-04-18 14:26:30.947] [foundation.biblepay.org:3001] read error: "end of file"
[2020-04-18 14:26:36.967] [foundation.biblepay.org:3001] read error: "end of file"
[2020-04-18 14:26:43.039] [foundation.biblepay.org:3001] read error: "end of file"
[2020-04-18 14:26:49.042] [foundation.biblepay.org:3001] read error: "end of file"
[2020-04-18 14:26:55.042] [foundation.biblepay.org:3001] read error: "connection reset by peer"
[2020-04-18 14:46:26.730]  net  use pool foundation.biblepay.org  Orphan Charity
[2020-04-18 14:46:26.731]  net  new job from foundation.biblepay.org diff 75000 algo rx/0 height 2079398
[2020-04-18 14:46:26.919]  msr  register values for "ryzen" preset has been set successfully (188 ms)
[2020-04-18 14:46:26.919]  rx   init dataset algo rx/0 (12 threads) seed 74cbd6714265473f...
[2020-04-18 14:46:26.939]  rx   allocated 2336 MB (2080+256) huge pages 100% 1168/1168 +JIT (18 ms)
[2020-04-18 14:46:30.374]  rx   dataset ready (3436 ms)
[2020-04-18 14:46:30.375]  cpu  use profile  *  (6 threads) scratchpad 2048 KB
[2020-04-18 14:46:30.533]  cpu  READY threads 6/6 (6) huge pages 100% 6/6 memory 12288 KB (158 ms)
[2020-04-18 14:46:39.895]  cpu  rejected (0/1) diff 1 [2] BBP "Stale" (1560 ms)
[2020-04-18 14:46:54.651]  cpu  accepted (1/1) diff 1 [4] BBP (308 ms)
[2020-04-18 14:47:01.653]  cpu  accepted (2/1) diff 75000 [132416] XMR (517 ms)
[2020-04-18 14:47:30.424] speed 10s/60s/15m 7646.2 n/a n/a H/s max 7663.1 H/s
[2020-04-18 14:47:35.616]  cpu  accepted (3/1) diff 1 [2] BBP (248 ms)
[2020-04-18 14:47:47.098]  cpu  accepted (4/1) diff 75000 [195829] XMR (1244 ms)
[2020-04-18 14:48:00.692]  cpu  accepted (5/1) diff 75000 [1150329] XMR (1340 ms)
[2020-04-18 14:48:03.600]  cpu  accepted (6/1) diff 75000 [1151563] XMR (1244 ms)
[2020-04-18 14:48:08.660]  cpu  rejected (6/2) diff 1 [1] BBP "Stale" (271 ms)
[2020-04-18 14:48:14.650]  cpu  accepted (7/2) diff 1 [14] BBP (258 ms)
[2020-04-18 14:48:14.783]  cpu  accepted (8/2) diff 75000 [115959] XMR (313 ms)
[2020-04-18 14:48:30.470] speed 10s/60s/15m 7654.6 7654.0 n/a H/s max 7663.1 H/s
[2020-04-18 14:48:52.697]  cpu  accepted (9/2) diff 1 [1] BBP (278 ms)
[2020-04-18 14:48:56.024]  net  new job from foundation.biblepay.org diff 155058 algo rx/0 height 2079399
[2020-04-18 14:49:08.713]  cpu  accepted (10/2) diff 2 [5] BBP (284 ms)

also on this machine i rebooted miner and seems fine now, working strait away. Will look into my other rigs later tonight. Thanks for feedback.
As you were replying I just got a piece of mesquite out for the grill (I cut mine with a chainsaw though).  I like saving up some mesquite, oak, hickory and cherry for grilling.

Thats great so far, lets hope we dont run out of sockets again.


1672
Here is the output of telnet:
Trying 104.238.147.232...
Connected to foundation.biblepay.org.
Escape character is '^]'.
Connection closed by foreign host.

Problem persists; I sent you more details over pm.

Ok, yes, I believe the bug is corrected in the socket class.

I will check this in during the next check-in for the foundation/pool.

Please, anyone having the connection issue, please retry now.


1673
Hey Rob!

Trying to install new miner ,  5.10.1 version xmrig-bbp i get these connection errors.
I have noticed over the past days i have seen similar output on some of my other machines running  the 5.6.2 and 5.6.3 versions.

Code: [Select]
* ABOUT        bbprig/5.10.1 gcc/9.2.0
 * BBP + XMR - Welcome to the future of orphan charity
 * To donate to the XMRig devs, send XMR here 48edfHu7V9Z84YzzMa6fUueoELZ9ZRXq9VetWzYGzKt52XU5xvqgzYnDK9URnRoJMk1j8nLwEVsaSWJ4fhdUyZijBGUicoD (or BTC here) 1P7ujsXeX7GxQwHNnJsRMgAdNkFZmNVqJT
 * LIBS         libuv/1.34.0 OpenSSL/1.1.1d hwloc/2.1.0
 * HUGE PAGES   permission granted
 * 1GB PAGES    unavailable
 * CPU          AMD Ryzen Threadripper 1920X 12-Core Processor (1) x64 AES
                L2:6.0 MB L3:32.0 MB 12C/24T NUMA:1
 * MEMORY       3.0/15.9 GB (19%)
 * DONATE       0%
 * ASSEMBLY     auto:ryzen
 * POOL #1      foundation.biblepay.org:3001 algo auto
 * COMMANDS     hashrate, pause, resume
 * OPENCL       disabled
 * CUDA         disabled
[2020-04-18 10:00:54.664] [foundation.biblepay.org:3001] read error: "connection reset by peer"
[2020-04-18 10:01:00.653] [foundation.biblepay.org:3001] read error: "connection reset by peer"
[2020-04-18 10:01:09.441] [foundation.biblepay.org:3001] read error: "connection reset by peer"
[2020-04-18 10:01:17.238] [foundation.biblepay.org:3001] read error: "connection reset by peer"
[2020-04-18 10:01:23.625] [foundation.biblepay.org:3001] read error: "connection reset by peer"
[2020-04-18 10:04:16.756] paused, press  r  to resume
[2020-04-18 10:04:19.429] resumed
[2020-04-18 10:04:22.260] speed 10s/60s/15m n/a n/a n/a H/s max n/a H/s
[2020-04-18 10:05:41.132] paused, press  r  to resume
[2020-04-18 10:05:43.344] resumed
[2020-04-18 10:05:45.335] speed 10s/60s/15m n/a n/a n/a H/s max n/a H/s
[2020-04-18 10:06:06.256] SIGHUP received, exiting

Any ideas?

Oh ok, this is happening to two people?  I had one other complaint, but that user had over 101 miners, so it had to do with ddos.


Lets try to resolve this; the bans last for 20 minutes.
Can you please tell me the exact time when it happens and send me a pm or email and we will trace the problem?

Btw my email is [email protected].


1674
Hi Rob,

I am getting "connection reset by peer" error when I try to mine towards foundation.biblepay.org:3001.

Is there another port I can try?

That port is vardiff, so it is our only port.
Can you please tell me what happens if you telnet to 'foundation.biblepay.org 3001', this will tell me if its a port block or not.
If it has not started working by now please can you give me your bbp address?

We have a limit of 100 tcp connections per miner IP currently.


1675
I second all of that, everything works fine. Re-Invest (comparable to an ETF plowing back dividends) would be nice to have, but for now I just log in from time to time and push the payouts back into the fractional sanc amount. :)

One more thing: after a while you get logged out of the forum automatically. When this happens and you click e. g. on "fractional sancs" you get redirected to a page stating that you have to be logged on for that.
I would prefer instead if you would directly be brought to the log in page.

10-4 on the reinvest, yes if someone just moves the balance every month they will get almost the entire "compounded" effect.
So on this logout after a certain period, I partially know whats going on and I agree it would be nice to lengthen that duration.

The problem is broken into two parts:  During the last 7 days we had a lot of deploys, which resets the session.  Its finally becoming stable, so the session should become more stable, meaning you wont be getting logged out inadvertently.

On part 2, let me check to see the length of the sessions auto-expire. 


1676
I believe it will work on almost all windows servers (as its written against .net framework 4.7.1).  But I would recommend using Server 2012.  I was able to buy a copy of 2012 for $99 recently online, and I burned my own vultr image, then I started an instance on vultr from the homemade ISO.  (This saves $10 a month if you already own the license, then you pay the same price as unix servers).

Im preparing it now for check in.  We obviously have a few enemies.  The pool has been d-dosed, port attacked, and the sql server attacked.  As long as the firewall is enabled, the pool owner should be OK, as now we have banning in here also.

The c# pool code has been opensourced, so now we can have more pools, if anyone wants to run one here is the new github:
https://github.com/biblepay/foundation

Note ahead of time, a person who decides to run a biblepay pool will have to do extra administrative work each month to ensure the orphan-tithes collected gets sent to actually sponsor orphans (its probably an extra day of work per month as compared to a normal pool).  And we would want this person to have a high level of integrity.

This github will also allow you to share the whole media collection (IE the records can be loaded that points to the media, which shares all the content at video.biblepay.org - that is all the videos on the foundation web site without taking up hard drive space). 




1677
Archived Proposals / Re: RandomX Giveaway for New RandomX Miners
« on: April 17, 2020, 07:03:28 PM »
Hello Rob.
From Portugal My adress  BHg1soTWtr4docL1sKbgaMDLNCauTZVmhj
In console with "faucetcode" i get this error: "Code": "N/A". I'using BBPCore1.5.0.7

Hi Ric,

Welcome aboard!

I hope you have a great weekend.

Sent.

Rob

1678
** BBP-Xmrig 5.10.1 - Mandatory Upgrade for Miners **


- Remove automatic tithing from the miner

* Note:  The old version of the miner tithes 10%.  Please start using the new version, as the pool now holds back the 10% orphan-tithe automatically.

Binaries:
https://wiki.biblepay.org/Upgrade_to_RandomX

** Mac is still building, MIP will notify

1679
Do you know what operating system the server must be for the new pool?

I believe it will work on almost all windows servers (as its written against .net framework 4.7.1).  But I would recommend using Server 2012.  I was able to buy a copy of 2012 for $99 recently online, and I burned my own vultr image, then I started an instance on vultr from the homemade ISO.  (This saves $10 a month if you already own the license, then you pay the same price as unix servers).

Im preparing it now for check in.  We obviously have a few enemies.  The pool has been d-dosed, port attacked, and the sql server attacked.  As long as the firewall is enabled, the pool owner should be OK, as now we have banning in here also. 


1680
I tried it out and it works. So far, I've gotten two daily rewards. The login requires 2FA (Google Authenticator, LastPass Authenticator, DUO, etc) which adds a nice layer of security. All the adds & removes were immediate. All the withdrawls showed up on my wallet immediately. The deposits of course require a few confirms which is to be expected. :)  The only thing I wish for is an auto reinvest feature, but I'm happy to visit the fractional sanctuary and add BBP whenever I get to it.

Thanks a lot Sun for this feedback!

Yes, we can add auto reinvest sometime in the future.

Im glad to know the 2fa worked with other providers other than google also.


Pages: 1 ... 105 106 107 108 109 110 111 [112] 113 114 115 116 117 118 119 ... 263