Bible Pay

Read 37772 times

  • Rob A.
  • Administrator

    • 1219


    • 20
    • June 05, 2017, 08:09:04 pm
    • Patmos, Island Of
    more
Re: BIBLEPAY - TESTNET THREAD - TESTING SANCTUARIES FOR GO LIVE AT CHRISTMAS
« Reply #540 on: December 16, 2017, 09:13:59 pm »
My mastenode went into state EXPIRED and running "masternode status" in the masternode wallet gave me the same message: "Not capable masternode: Invalid protocol version"

I had to increment the protocol version today in prod- is this in prod?



  • togoshigekata
  • Sr. Member

    • 333


    • 19
    • September 01, 2017, 10:21:10 am
    • USA
    more
Re: BIBLEPAY - TESTNET THREAD - TESTING SANCTUARIES FOR GO LIVE AT CHRISTMAS
« Reply #541 on: December 16, 2017, 09:26:29 pm »
Yes, this is in production/mainnet, I noticed protocolversion went from 70709 to 70710

looks like its slowly hitting the current masternodes and operators are starting them again,
I assume it wont be an issue once the mandatory block is hit?

Im not sure if another start-alis is actually needed or not, How long can a masternode stay in the EXPIRED state?

Yesterday my biblepay daemon crashed in my masternode and it was in the EXPIRED state and when I turned on the daemon again, it went right back to ENABLED, so that was cool.

I know starting a masternode again can take like an hour or so to go from PRE_ENALBED to ENABLED.

===

Just noticed your post:

"everyone will have to start-many on the sanctuaries, we just had a protocol upgrade."
« Last Edit: December 16, 2017, 10:30:15 pm by togoshigekata »


Re: BIBLEPAY - TESTNET THREAD - TESTING SANCTUARIES FOR GO LIVE AT CHRISTMAS
« Reply #542 on: December 16, 2017, 11:31:35 pm »
Yes, this is in production/mainnet, I noticed protocolversion went from 70709 to 70710

looks like its slowly hitting the current masternodes and operators are starting them again,
I assume it wont be an issue once the mandatory block is hit?

Im not sure if another start-alis is actually needed or not, How long can a masternode stay in the EXPIRED state?

Yesterday my biblepay daemon crashed in my masternode and it was in the EXPIRED state and when I turned on the daemon again, it went right back to ENABLED, so that was cool.

I know starting a masternode again can take like an hour or so to go from PRE_ENALBED to ENABLED.

===

Just noticed your post:

"everyone will have to start-many on the sanctuaries, we just had a protocol upgrade."

Hey Togo, I replied on bitcointalk with a possible fix. Make sure you controller wallet is also updated.

Edit: Just catching up and saw jaapgvk had that issue too. Try to have a look at my post there and tell me if it works for you. Again, make sure to update your controller wallet too.
« Last Edit: December 16, 2017, 11:36:41 pm by Alex »


  • jaapgvk
  • Hero Member

    • 571


    • 22
    • September 01, 2017, 08:02:57 pm
    • Netherlands
    more
Re: BIBLEPAY - TESTNET THREAD - TESTING SANCTUARIES FOR GO LIVE AT CHRISTMAS
« Reply #543 on: December 17, 2017, 01:52:35 am »
Thank you for your help Alex. I followed your steps and my masternode says 'PRE-ENABLED' now, so I hope it is fixed.

Looks like other masternodes stayed enabled during the upgrade?

Also, on a sidenode: I reached out to coinsmarkets yesterday, and they halted deposits and withdrawals before the update :)


Re: BIBLEPAY - TESTNET THREAD - TESTING SANCTUARIES FOR GO LIVE AT CHRISTMAS
« Reply #544 on: December 17, 2017, 02:18:45 am »
So for those using a Vultr $5 host, are you mining with it?  If so, what genrate are you using and how much effect does it have on everything else?  I've got my MN on 1 and my soon to be MN on 2. 


  • klondike
  • Full Member

    • 150


    • -8
    • October 10, 2017, 09:00:24 am
    more
Re: BIBLEPAY - TESTNET THREAD - TESTING SANCTUARIES FOR GO LIVE AT CHRISTMAS
« Reply #545 on: December 17, 2017, 07:11:00 am »
616westwarmoth yes you can mining with MN machine ;)


Re: BIBLEPAY - TESTNET THREAD - TESTING SANCTUARIES FOR GO LIVE AT CHRISTMAS
« Reply #546 on: December 17, 2017, 07:59:58 am »
616westwarmoth yes you can mining with MN machine ;)

Yes I am doing that.  The question is does it impact Masternodes and two, what is the ideal setting for those who are using Vultr.


  • tiras
  • Jr. Member

    • 59


    • 1
    • September 01, 2017, 02:00:09 pm
    more
Re: BIBLEPAY - TESTNET THREAD - TESTING SANCTUARIES FOR GO LIVE AT CHRISTMAS
« Reply #547 on: December 17, 2017, 08:35:18 am »
Yes I am doing that.  The question is does it impact Masternodes and two, what is the ideal setting for those who are using Vultr.

I won't go above genproclimit=1 for mining if you have 1 or 2 core MN 


  • tiras
  • Jr. Member

    • 59


    • 1
    • September 01, 2017, 02:00:09 pm
    more
Re: BIBLEPAY - TESTNET THREAD - TESTING SANCTUARIES FOR GO LIVE AT CHRISTMAS
« Reply #548 on: December 17, 2017, 10:25:55 pm »
if anybody wants to try this provider for mining  :  https://hive.happybeehost.com/cart.php?a=confproduct&i=0


$6 for a 4CPU/2GB VPS is not bad at all 


  • jaapgvk
  • Hero Member

    • 571


    • 22
    • September 01, 2017, 08:02:57 pm
    • Netherlands
    more
Re: BIBLEPAY - TESTNET THREAD - TESTING SANCTUARIES FOR GO LIVE AT CHRISTMAS
« Reply #549 on: December 18, 2017, 10:25:36 am »
if anybody wants to try this provider for mining  :  https://hive.happybeehost.com/cart.php?a=confproduct&i=0


$6 for a 4CPU/2GB VPS is not bad at all

That's cheap indeed :) I wonder what the hashrate will be.

I've been using your hyperexpert suggestion for my masternode. Working great so far :)


  • putzlappen
  • Newbie

    • 25


    • 4
    • December 16, 2017, 11:54:13 am
    • Leipzig - Germany
    more
Re: BIBLEPAY - TESTNET THREAD - TESTING SANCTUARIES FOR GO LIVE AT CHRISTMAS
« Reply #550 on: December 18, 2017, 10:35:43 am »
I rent a small VS for 5$/month on vultr.com.
Just for testing and learning. But now, after 24 hours of try and error (and 10 reinstalls of debian) iam again at my starting Point: nothing works  :'(

I worked like these tut: https://github.com/biblepay/biblepay/blob/master/BuildBiblePay.txt (and a lot of others, realy similars)

Maybe you got a hint for installing biblepay wallet an miner on an absolutly fresh debian for a noob like me  ;D
If not, no problem, i give my best, in weeks i have solved any problems^^

Best regards, Sebastian!
Greetings from Germany <3


  • jaapgvk
  • Hero Member

    • 571


    • 22
    • September 01, 2017, 08:02:57 pm
    • Netherlands
    more
Re: BIBLEPAY - TESTNET THREAD - TESTING SANCTUARIES FOR GO LIVE AT CHRISTMAS
« Reply #551 on: December 18, 2017, 10:51:06 am »
I rent a small VS for 5$/month on vultr.com.
Just for testing and learning. But now, after 24 hours of try and error (and 10 reinstalls of debian) iam again at my starting Point: nothing works  :'(

I worked like these tut: https://github.com/biblepay/biblepay/blob/master/BuildBiblePay.txt (and a lot of others, realy similars)

Maybe you got a hint for installing biblepay wallet an miner on an absolutly fresh debian for a noob like me  ;D
If not, no problem, i give my best, in weeks i have solved any problems^^

Best regards, Sebastian!

Hi Sebastian,

I don't know if it will work with debian, but if you have a fresh installation of ubuntu 16.04, and follow this guide step by step, it should absolutely work:
https://www.reddit.com/r/BiblePay/comments/6ummuj/how_to_mine_biblepay_on_linux/

If you only have 1GB of RAM, you should also enlarge your swap-file before installation:
Code: [Select]
free (check if swap is 0)
dd if=/dev/zero of=/var/swap.img bs=1024k count=1000
mkswap /var/swap.img
swapon /var/swap.img
free (check if swap is 1024)


  • putzlappen
  • Newbie

    • 25


    • 4
    • December 16, 2017, 11:54:13 am
    • Leipzig - Germany
    more
Re: BIBLEPAY - TESTNET THREAD - TESTING SANCTUARIES FOR GO LIVE AT CHRISTMAS
« Reply #552 on: December 18, 2017, 11:14:46 am »
Hi Sebastian,

I don't know if it will work with debian, but if you have a fresh installation of ubuntu 16.04, and follow this guide step by step, it should absolutely work:
https://www.reddit.com/r/BiblePay/comments/6ummuj/how_to_mine_biblepay_on_linux/

If you only have 1GB of RAM, you should also enlarge your swap-file before installation:
Code: [Select]
free (check if swap is 0)
dd if=/dev/zero of=/var/swap.img bs=1024k count=1000
mkswap /var/swap.img
swapon /var/swap.img
free (check if swap is 1024)

WOW, Thanks for your fast Answer. I will try it directly <3
Greetings from Germany <3


  • jaapgvk
  • Hero Member

    • 571


    • 22
    • September 01, 2017, 08:02:57 pm
    • Netherlands
    more
Re: BIBLEPAY - TESTNET THREAD - TESTING SANCTUARIES FOR GO LIVE AT CHRISTMAS
« Reply #553 on: December 18, 2017, 11:24:23 am »
WOW, Thanks for your fast Answer. I will try it directly <3

You're welcome :) Just let me know if something doesn't work, and I'll try to help you as best as I can.


  • tiras
  • Jr. Member

    • 59


    • 1
    • September 01, 2017, 02:00:09 pm
    more
Re: BIBLEPAY - TESTNET THREAD - TESTING SANCTUARIES FOR GO LIVE AT CHRISTMAS
« Reply #554 on: December 18, 2017, 11:56:00 am »
That's cheap indeed :) I wonder what the hashrate will be.

I've been using your hyperexpert suggestion for my masternode. Working great so far :)

forgot to add a ref link .  :)   kidding .  glad it was useful for someone